Job Management Partner 1/Integrated Management - Manager Messages

[Contents][Index][Back][Next]

2.14 Messages from the IM database (KNAN11000 to KNAN11199, KFPH00212 to KFPH00213, KFPS01850, and KFPS05210)

KNAN11005-I

The IM database service will now be set up.

Reports that setup of the IM database service will start.

S:
Continues processing.

KNAN11006-I

Size of the IM database service : size

Reports the size of the IM database service to be created.

The value specified in the IMDBSIZE parameter of the setup information file is output for size.

S:
Continues processing.

KNAN11007-I

The data storage directory of the IM database service : directory-name

Reports the data storage directory of the IM database service to be created.

The value specified in the IMDBDIR parameter of the setup information file is output for directory-name.

S:
Continues processing.

KNAN11008-I

Port number of the IM database service : port-number

Reports the port number of the IM database service to be created.

The value specified in the IMDBPORT parameter of the setup information file is output for port-number.

S:
Continues processing.

KNAN11009-Q

Do you want to continue processing? (Y/N):

Queries whether the user wants to continue processing.

S:
Continues processing.

O:
To continue processing, enter Y or y. To suspend processing, enter N or n.

KNAN11010-I

Setup will now start.

Reports that setup of the IM database service will start.

S:
Continues processing.

KNAN11011-I

Setup was canceled.

This message is output when N or n is entered in response to the KNAN11009-Q message output during execution of the setup command.

S:
Suspends processing.

KNAN11012-I

Setup ended normally.

Reports that setup of the IM database service ended normally.

S:
Continues processing.

KNAN11013-I

The IM database service will now be installed.

Reports that installation of the IM database service will start.

S:
Continues processing.

KNAN11014-I

The IM database service was installed.

Reports that installation of the IM database service is complete.

S:
Continues processing.

KNAN11015-I

The IM database service has already been installed.

This message is output if the setup command is executed when the IM database service is already installed.

S:
Continues processing.

KNAN11016-I

The system database area of the IM database service will now be created.

Reports that creation of the system database area of the IM database service will start.

S:
Continues processing.

KNAN11017-I

The system database area of the IM database service was created.

Reports that creation of the system database area of the IM database service is complete.

S:
Continues processing.

KNAN11018-I

The system database area of the IM database service has already been created.

This message is output if the setup command is executed when the system database area has already been created.

S:
Continues processing.

KNAN11019-I

The integrated monitoring database area of the IM database service will now be created.

Reports that creation of the integrated monitoring database area of the IM database service will start.

S:
Continues processing.

KNAN11020-I

The integrated monitoring database area of the IM database service was created.

Reports that creation of the integrated monitoring database area of the IM database service is complete.

S:
Continues processing.

KNAN11021-E

A command option is invalid.

A command argument is invalid.

S:
Suspends processing.

O:
Referring to the argument that was output in Usage, specify a valid argument, and then re-execute the command.

KNAN11022-E

Superuser permissions are required to execute the command.

The user executing the command does not have Administrator permissions.

S:
Suspends processing.

O:
Execute the command as a user with Administrator or root permissions.

KNAN11023-E

An internal error occurred. (error code = reason-code)

An internal error occurred.

error-code contains the reason code for the cause of the error.

S:
Suspends processing.

O:
Use the data collection tool to collect data, and then contact a system administrator.

KNAN11024-E

Memory allocation has failed.

An attempt to allocate memory failed.

S:
Suspends processing.

O:
Close any unnecessary programs.

KNAN11025-E

A message resource could not be obtained.
A resource could not be obtained.

An attempt to obtain a message resource failed.

S:
Suspends processing.

O:
Use the data collection tool to collect data, and then contact a system administrator.

KNAN11026-E

A message resource could not be created.
A resource could not be created message.

An attempt to construct a message during message resource acquisition failed.

S:
Suspends processing.

O:
Use the data collection tool to collect data, and then contact a system administrator.

KNAN11027-E

A message resource could not be initialized.
A resource could not be initialized.

An attempt to acquire a message resource during message resource initialization failed.

S:
Suspends processing.

O:
Use the data collection tool to collect data, and then contact a system administrator.

KNAN11028-I

Please wait.

Reports that the command is being executed.

S:
Continues processing.

KNAN11029-E

Acquisition of the status of the IM database service has failed.

The status of the JP1/IM - Manager DB Cluster Service and JP1/IM - Manager DB Server services of the IM database service could not be acquired.

S:
Suspends processing.

O:
  • In Windows:
    Determine whether the JP1/IM - Manager DB Cluster Service and JP1/IM - Manager DB Server of the IM database service are registered. If they are registered, stop the service, and then re-execute the command. If they are not registered, use the data collection tool to collect data, and then contact a system administrator.
  • In UNIX:
    Use the data collection tool to collect data, and then contact a system administrator.

KNAN11030-E

A required key is not specified in the setup information file. (key = item-name)

An item in the setup information file specified with the setup command -f option is invalid.

item-name: Item to be specified

S:
Suspends processing.

O:
Specify the item in the setup information file indicated by the item name in the message, and then re-execute the command.

KNAN11031-E

The integrated monitoring database area has already been created.

This message is output if the setup command is executed when the integrated monitoring database has already been set up.

S:
Suspends processing.

O:
To set up the integrated monitoring database again, unset up the integrated monitoring database, and then re-execute the command.

KNAN11032-E

Acquisition of log directory information from common definitions failed.

Log directory information could not be acquired from the common definition information.

S:
Suspends processing.

O:

For a logical host:
Create the logical host name of JP1/IM - Manager on the host specified in the parameter. If it has already been created, create the logical host name of JP1/IM - Manager again. If the problem is not resolved, contact a system administrator.

For a physical host:
Perform an overwrite installation of JP1/IM - Manager. If the problem is not resolved, contact a system administrator.

KNAN11033-E

Log initialization has failed. (code = error-code, status = error-status)

Initialization of HNTRLIB2 failed.

error-code contains the HNTR2_Initialize() return value.

error-status contains the return value of HNTR2_GetLastError(), which acquired the reason why HNTR2_Initialize() failed.

S:
Suspends processing.

O:
Make sure that the Hitachi Network Objectplaza Trace Monitor 2 service is running, and then re-execute the command. If the same message is output, contact a system administrator.

KNAN11034-E

An attempt to stop the IM database service has failed.

An attempt to stop the IM database service failed.

HiRDB is placed in invalid status.

S:
Suspends processing.

O:
  • In Windows:
    Stop the IM database service, and then re-execute the command. If the attempt to stop the IM database service fails, contact a system administrator. If the same message is output after the command is retried, use the data collection tool to collect data, and then contact a system administrator.
  • In UNIX:
    Execute the jimdbstop command specifying the -f option to stop the IM database service, and then re-execute the command. If the attempt to stop the IM database service fails, contact a system administrator. If the same message is output after the command is retried, use the data collection tool to collect data, and then contact a system administrator.

KNAN11035-E

An attempt to start the IM database service has failed.

An attempt to start the IM database service failed.

HiRDB is placed in invalid status.

S:
Suspends processing.

O:
  • In Windows:
    Start the IM database service, and then re-execute the command. If the attempt to start the IM database service fails, contact a system administrator. If the same message is output after the command is retried, use the data collection tool to collect data, and then contact a system administrator.
  • In UNIX:
    Execute the jimdbstop command specifying the -f option to stop the IM database service, and then re-execute the command. If the attempt to stop the IM database service fails, contact a system administrator. If the same message is output after the command is retried, use the data collection tool to collect data, and then contact a system administrator.

KNAN11036-E

The installation directory of the IM database service cannot be created.

An attempt to create the installation directory of the IM database service from the setup information file specified using the setup command with the -f option failed.

S:
Suspends processing.

O:
Change the IM database service installation directory indicated in the IMDBENVDIR parameter of the setup information file to a path that can be created for the directory, and then re-execute the command.

KNAN11037-E

The data storage directory of the IM database service cannot be accessed.

The data storage directory of the IM database service could not be accessed.

S:
Suspends processing.

O:
If operating in a cluster environment, make sure that shared disk space was allocated on the host that executed the command, and then re-execute the command.

KNAN11038-E

A key specified in the setup information file is invalid. (key = item-name)

The value of an item in the setup information file specified by the setup command with the -f option is invalid.

item-name: Invalid item name

S:
Suspends processing.

O:
Correct the value of the item specified in the setup information file, and then re-execute the command.

KNAN11039-E

The logical host number is duplicated. (key = item-name)

The logical host number is duplicated.

S:
Suspends processing.

O:
Correct the logical host number, and then re-execute the command.

KNAN11040-E

The setup information file does not exist.

The setup information file specified by the setup command with the -f option does not exist.

S:
Suspends processing.

O:
Make sure that the setup information file exists, specify the correct path, and then re-execute the command.

KNAN11041-E

Installation of the IM database service has failed.

Installation of the IM database service failed.

S:
Suspends processing.

O:
If another error message was output before this message, take the corrective action given for that message. If no error message was output before this message, use the data collection tool to collect data, and then contact a system administrator.

KNAN11042-E

Creation of the system database area has failed. Please execute the setup again after the cause of the error is solved, and execute unsetup.

An attempt to create the system database area failed.

S:
Suspends processing.

O:
If another error message was output before this message, take the corrective action given for that message, perform unsetup, and then re-execute the command. If no error message was output before this message, use the data collection tool to collect data, and then contact a system administrator.

KNAN11043-E

The data storage directory of the IM database service cannot be made.

The data storage directory of the IM database service specified by the IMDBDIR parameter in the setup information file using the setup command with the -f option could not be created.

S:
Suspends processing.

O:
Make sure that the directory specified in the setup information file can be created. Also determine whether the same directory was created in IM database setup for another host. If the directory already exists, specify another directory, and then re-execute the command.

KNAN11044-E

A port number is duplicated. (key = item-name)

The port number is duplicated in the IMDBPORT parameter in the setup information file specified by the setup command with the -f option.

S:
Suspends processing.

O:
Check the following items, specify a unique port number in the system, and then re-execute the command.
  • Is the specified port number duplicated in another logical host setup?
  • Is the port number indicated in the services file duplicated?
  • Is the port number used by the installed HiRDB of another product duplicated?
  • Does the port number duplicate a temporary port used by another product or OS?

KNAN11045-E

The content of the setup information file is different from the IM configuration database setup.(key = item-name, value = value)

The contents of the setup information file specified when the integrated monitoring database was set up differ from the contents of the setup information file specified when the IM Configuration Management database was set up.

S:
Suspends processing.

O:
If specifying the setup information file using the setup command, change the contents of the setup information file to match the values specified during IM Configuration Management database setup, and then re-execute the command. Alternatively, execute the setup command specifying the -s option, and then re-execute the command.

KNAN11046-E

The service JP1/IM-Manager DB Server _logical-host-name is not running.

This message is output if the command is executed when the IM database service is not running.

S:
Suspends processing.

O:
Make sure that the service indicated in the message is running. If it is not running, start it, and then re-execute the command.

KNAN11047-E

A key name specified in the setup information file is invalid. (key = item-name)

An item name specified using the setup command -f option is invalid.

item-name: Invalid item name

S:
Suspends processing.

O:
Correct the item specified in the setup information file, and then re-execute the command.

KNAN11048-E

A key name specified in the setup information file is duplicated. (key = item-name)

An item specified using the setup command -f option is duplicated.

item-name: Duplicate item name

S:
Suspends processing.

O:
Delete the duplicate item specified in the setup information file, and then re-execute the command.

KNAN11049-E

The [option-name] option is invalid.

An invalid option is specified, or no option value is specified.

option: Option that cannot be specified

S:
Suspends processing.

O:
Correct the option, and then re-execute the command.

KNAN11050-E

The [option-name] option is defined more than once.

An option is specified more than once.

option: Option specified more than once

S:
Suspends processing.

O:
Correct the option, and then re-execute the command.

KNAN11051-E

An illegal value is specified for the [option-name] option.

An invalid value is specified for an option.

option: Option with an invalid value

S:
Suspends processing.

O:
Correct the value specified for the option, and then re-execute the command.

KNAN11052-E

Acquisition of the installation path from the registry has failed. (error code = error-code)

Acquisition of the JP1/IM - Manager installation path from the registry failed.

S:
Suspends processing.

O:
Perform an overwrite installation of JP1/IM - Manager. If this does not resolve the problem, use the data collection tool to collect data, and then contact a system administrator.

KNAN11053-E

An attempt to read a file has failed. (file name = file-name)

An attempt to read a file failed.

file-name: Name of the file that could not be read

S:
Suspends processing.

O:
Make sure that the indicated file can be read. If it can be read, perform an overwrite installation of JP1/IM - Manager.

KNAN11054-E

The format of a file is invalid. (file name = file-name)

The format of a file is invalid.

file-name: Name of the file with an invalid format

S:
Suspends processing.

O:
Perform an overwrite installation of JP1/IM - Manager.

KNAN11055-E

An attempt to set an environment variable has failed.

An attempt to specify an environment variable to connect to the IM database service failed.

S:
Suspends processing.

O:
Make sure that the value can be specified for the environment variable, and then re-execute the command. If the same message is output, use the data collection tool to collect data, and then contact a system administrator.

KNAN11056-E

An attempt to write a file has failed. (file name = file-name)

An attempt to write to a file failed.

file-name: Name of the file that could not be written to

S:
Suspends processing.

O:
Use the data collection tool to collect data, and then contact a system administrator.

KNAN11057-E

An attempt to copy a file has failed. (file name = file-name)

An attempt to copy a file failed.

file-name: Name of the file that could not be copied

S:
Suspends processing.

O:
Use the data collection tool to collect data, and then contact a system administrator.

KNAN11058-E

Processing was interrupted because there is not enough free disk space.

Insufficient disk space was specified in the setup information file for the disk storage directory of the IM database service.

S:
Suspends processing.

O:
Allocate disk space from the IM database service data storage directory, or switch to a directory with sufficient disk space, and then re-execute the command.

KNAN11059-E

Acquisition of a host name has failed.

Acquisition of an OS host name failed.

S:
Suspends processing.

O:
Execute the hostname command to make sure that the host name is output normally, and then re-execute the command. If the same message is output, use the data collection tool to collect data, and then contact a system administrator.

KNAN11060-E

There is not enough free space in the disk containing the installation directory of the IM database service.

There is insufficient disk space for the installation directory of the IM database service specified in the IMDBENVDIR parameter of the setup information file using the -f option.

S:
Suspends processing.

O:
Allocate sufficient disk space in the IM database configuration directory, or switch to a directory that has sufficient disk space, and then re-execute the command.

KNAN11061-E

Processing was interrupted because the IM database service is running.

An error occurred during unsetup execution because the IM database service is running.

S:
Suspends processing.

O:
Stop the IM database service, and then re-execute the command.

KNAN11062-E

Processing was interrupted because at least one file is being used.

An error occurred during setup because a file is being used.

S:
Suspends processing.

O:
Stop the IM database service, and then re-execute the command.

KNAN11063-E

A file necessary for installing the IM database service is missing.

A file required to install the IM database service was deleted.

S:
Suspends processing.

O:
Perform an overwrite installation of JP1/IM - Manager, and then re-execute the command.

KNAN11064-W

Unsetup ended. But file deletion has failed. It is necessary to reboot the OS.

A file could not be deleted during unsetup of the IM database service.

S:
Suspends processing.

O:
Restart the OS to delete the file that could not be deleted.

KNAN11065-E

The file file-name does not exist.

A file required for command execution does not exist.

file-name: HiRDB setup file

S:
Suspends processing.

O:
Determine whether the indicated file exists. If it does not exist, re-install JP1/IM - Manager. If the file exists, use the data collection tool to collect data, and then contact a system administrator.

KNAN11066-I

Installation directory of the IM database service : directory-name

Reports the installation directory of the IM database service to be created.

S:
Suspends processing.

KNAN11067-E

Creation of an RD area has failed.

An attempt to create an RD area failed.

S:
Suspends processing.

O:
Use the data collection tool to collect data, and then contact a system administrator.

KNAN11068-E

Creation of a table has failed.

An attempt to create a table failed.

S:
Suspends processing.

O:
Use the data collection tool to collect data, and then contact a system administrator.

KNAN11069-E

The data storage directory of the IM database service cannot be made on a shared disk.

The data storage directory of the IM database service specified in the SHAREDBDIR parameter of the setup information file using the -f option could not be created on a shared disk.

S:
Suspends processing.

O:
Make sure that the directory specified in the setup information file can be created. Also determine whether the same directory was created in IM database setup for another host. If the directory already exists, specify another directory, and then re-execute the command.

KNAN11070-E

Registration of a stored function has failed.

Registration of a stored function failed.

S:
Suspends processing.

O:
Use the data collection tool to collect data, and then contact a system administrator.

KNAN11071-E

Other commands of the IM database service are executing.

Another command is already being executed in the IM database server.

S:
Suspends processing.

O:
Wait for the other command in the IM database server to finish, and then re-execute the command.

KNAN11074-I

The IM configuration database area of the IM database service will now be created.

Reports that the integrated monitoring database area will be created.

S:
Continues processing.

KNAN11075-I

The IM configuration database area of the IM database service was created.

Reports that the integrated monitoring database area was created.

S:
Continues processing.

KNAN11076-E

The IM configuration database area has already been created.

The IM configuration database area has already been created.

S:
Suspends processing.

O:
To set up the IM Configuration Management database again, unset up the IM Configuration Management database, and then re-execute the command.

KNAN11077-E

The specified logical host host-name does not exist.

The specified logical host does not exist.

S:
Suspends processing.

O:
Make sure that the JP1/IM - Manager logical host was set up, and then re-execute the command.

KNAN11078-E

Creation of the integrated monitoring database area has failed. Please execute the setup again after the cause of the error is solved, and execute unsetup.

An attempt to create the integrated monitoring database failed during setup.

S:
Suspends processing.

O:
If another error message was output before this message, take the corrective action given for that message, perform unsetup, and then re-execute the command.
If this message was output to an integrated trace log, take the corrective action given in the message output to the console.
If no error message was output before this message, use the data collection tool to collect data, and then contact a system administrator.

KNAN11079-E

Creation of the IM configuration database area has failed. Please execute the setup again after the cause of the error is solved, and execute unsetup.

An attempt to create the IM configuration database area failed.

S:
Suspends processing.

O:
If another error message was output before this message, take the corrective action given for that message, perform unsetup, and then re-execute the command.
If this message was output to an integrated trace log, take the corrective action given in the message output to the console.
If no error message was output before this message, use the data collection tool to collect data, and then contact a system administrator.

KNAN11080-E

The specified set-up type is different from the currently set-up type.

The -c standby option was specified for the command on a host set up as a primary system, or the -c online option was specified for the command on a host set up as a standby system.

S:
Suspends processing.

O:
Correct the parameter, and then re-execute the command.

KNAN11081-E

The content of the setup information file is different from the integrated monitoring database setup. (key = item-name, value = value)

The contents of the setup information file specified during setup of the IM Configuration Management database do not match the contents of the setup information file specified during setup of the integrated monitoring database.

S:
Suspends processing.

O:
To specify the setup information file using the setup command, specify the same values as those specified when the integrated monitoring database was set up, and then re-execute the command. Alternatively, execute the setup command specifying the -s option, and then re-execute the command.

KNAN11082-E

A network drive cannot be specified.

The specified path was output for a network drive.

S:
Suspends processing.

O:
For the database setup command, make sure that the network drive path is not specified in IMDBDIR, IMDBENVDIR, or SHAREDBDIR.
For the database backup recovery command, make sure that the network drive path is not specified in the path specified in the parameter.

KNAN11083-E

A file name reserved by Windows cannot be specified.

The specified path contains a Windows reserved file name.

S:
Suspends processing.

O:
For the database setup command, make sure that a Windows reserved file name is not specified in IMDBDIR, IMDBENVDIR, or SHAREDBDIR.
For the database backup recovery command, make sure that a Windows reserved file name is not specified in the path specified in the parameter.

KNAN11084-E

Creation of a database file system area has failed.

An attempt to create a database file system area failed.

S:
Suspends processing.

O:
If another error message was output before this message, take the corrective action given for that message.
If no error message was output before this message, check the following items, perform unsetup, and then re-execute the command.
  • Does the file system of the path specified in IMDBDIR correspond to a large file?
  • Is the kernel parameter set appropriately?
  • Is there an error in the host name specified in LOGICALHOSTNAME or ONLINEHOSTNAME? Is the specified host name set correctly in the hosts file?

KNAN11085-E

The service JP1/IM-Manager database Cluster Service_logical-host-name is running.

This message is output if the command is executed when the server used for clustering the IM database service is running.

S:
Suspends processing.

O:
Stop the service indicated in the message, and then re-execute the command.

KNAN11086-E

Could not start setup.

An attempt to start setup failed.

S:
Suspends processing.

O:
If another error message was output before this message, take the corrective action given for that message, and then re-execute the command. If no error message was output before this message, use the data collection tool to collect data, and then contact a system administrator.

KNAN11087-W

Deletion of the file file-name has failed.

An attempt to delete a file failed.

S:
Continues processing.

O:
Wait until the command has finished, and then delete the indicated file.

KNAN11088-E

Deletion of the file file-name has failed.

An attempt to delete a file failed.

S:
Suspends processing.

O:
Use the data collection tool to collect data, and then contact a system administrator.

KNAN11089-E

Creation of the directory directory-name has failed.

An attempt to create a directory failed.

S:
Suspends processing.

O:
Make sure that the directory indicated in the message can be created.

KNAN11090-I

The integrated monitoring database was created. (host name = host-name, database size = size, port number = port-number, database storage directory = DB-storage-directory, database installation directory = DB-installation-destination, database storage directory [SHARE] = shared-disk-DB-storage-directory)

This message outputs information about the integrated monitoring database that was created.

host-name: For a logical host, the logical host name is output; for a physical host, (JP1_DEFAULT) is output

size: Database size

port-number: Port number

DB-storage-directory: Database storage destination

DB-installation-destination: Database installation destination

shared-disk-DB-storage-directory: For a cluster environment, the storage destination of the database created on the shared disk is output. For a physical host, a space is output.

S:
Continues processing.

KNAN11091-I

The integrated monitoring database was deleted. (host name = host-name, database size = size, port number = port-number, database storage directory = DB-storage-directory, database installation directory = DB-installation-destination, database storage directory [SHARE] = shared-disk-DB-storage-directory)

This message outputs information about the integrated monitoring database that was deleted.

host-name: For a logical host, the logical host name is output; for a physical host, (JP1_DEFAULT) is output

size: Database size

port-number: Port number

DB-storage-directory: Database storage destination

DB-installation-destination: Database installation destination

shared-disk-DB-storage-directory: For a cluster environment, the storage destination of the database created on the shared disk is output. For a physical host, a space is output.

S:
Continues processing.

KNAN11092-I

The IM configuration database was created. (host name = host-name, database size = size, port number = port-number, database storage directory = DB-storage-directory, database installation directory = DB-installation-destination, database storage directory [SHARE] = shared-disk-DB-storage-directory)

This message outputs information about the IM Configuration Management database that was created.

host-name: For a logical host, the logical host name is output; for a physical host, (JP1_DEFAULT) is output

size: Database size

port-number: Port number

DB-storage-directory: Database storage destination

DB-installation-destination: Database installation destination

shared-disk-DB-storage-directory: For a cluster environment, the storage destination of the database created on the shared disk is output. For a physical host, a space is output.

S:
Continues processing.

KNAN11093-I

The IM configuration database was deleted. (host name = host-name, database size = size, port number = port-number, database storage directory = DB-storage-directory, database installation directory = DB-installation-destination, database storage directory [SHARE] = shared-disk-DB-storage-directory)

This message outputs information about the IM Configuration Management database that was deleted.

host-name: For a logical host, the logical host name is output; for a physical host, (JP1_DEFAULT) is output

size: Database size

port-number: Port number

DB-storage-directory: Database storage destination

DB-installation-destination: Database installation destination

shared-disk-DB-storage-directory: For a cluster environment, the storage destination of the database created on the shared disk is output. For a physical host, a space is output.

S:
Continues processing.

KNAN11094-E

Other processes are accessing the IM database service.

The command could not be executed because other processes are accessing the IM database service.

S:
Suspends processing.

O:
Stop the JP1/IM - Manager service, and then re-execute the command.
Alternatively, make sure that no other database operation is being executed, wait for the command to finish, and then retry the operation.

KNAN11095-I

Shared disk for data storage directory of the IM database service: shared-disk-storage-directory

Reports the data storage directory of the IM database service on the shared disk created during cluster setup.

S:
Continues processing.

KNAN11096-E

JP1_DEFAULT is specified for the hostname.

An unidentifiable character string was specified in a parameter.

S:
Suspends processing.

O:
Correct the parameter, and re-execute the command.

KNAN11097-E

There is not enough free space on the disk containing the data storage directory of the IM database service. (key = item-name, necessary size = required-size Mbyte)

The data storage directory and the shared data storage directory of the IM database service specified in the setup information file contain insufficient disk space to create the IM database service.

item-name: IMDBDIR or SHAREDBDIR

required-size: Space required to create the IM database service (in megabytes)

S:
Suspends processing.

O:
Do one of the following:
  • Specify a directory that has sufficient disk space.
  • Allocate the amount of disk space indicated in the message to the specified directory.

KNAN11098-W

An attempt to change the startup type of the service JP1/IM-Manager database Server_logical-host-name has failed.

An attempt to change the startup type of the service indicated in the message from Automatic to Manual failed.

S:
Continues processing.

O:
Wait for the command to finish normally, and then, in the window that manages the service, change the startup type of the service indicated in the message from Automatic to Manual.

KNAN11099-E

Initialization of common definitions has failed.

An attempt to initialize common definition information failed.

S:
Suspends processing.

O:
Use the data collection tool to collect data, and then contact a system administrator.

KNAN11100-I

Unsetup of the IM database service will now be performed.

Reports that unsetup of the IM database service will be performed.

S:
Continues processing.

KNAN11101-I

Unsetup will now start.

Reports that unsetup processing of the IM database service will start.

S:
Continues processing.

KNAN11102-I

The integrated monitoring database area of the IM database service will now be deleted.

Reports that the integrated monitoring database area of the IM database service will be deleted.

S:
Continues processing.

KNAN11103-I

The integrated monitoring database area of the IM database service was deleted.

Reports that the integrated monitoring database area of the IM database service was deleted.

S:
Continues processing.

KNAN11104-I

The system database area of the IM database service will now be deleted.

Reports that the system database area will be deleted.

S:
Continues processing.

KNAN11105-I

The system database area of the IM database service was deleted.

Reports that the system database area of the IM database service was deleted.

S:
Continues processing.

KNAN11106-I

The IM database service will now be uninstalled.

Reports that the IM database service will be uninstalled.

S:
Continues processing.

KNAN11107-I

The IM database service was uninstalled.

Reports that the IM database service was uninstalled.

S:
Continues processing.

KNAN11108-I

Unsetup ended normally.

Reports that unsetup of the IM database service ended normally.

S:
Continues processing.

KNAN11109-E

The IM database service is not set up.

The setup command cannot be executed.

S:
Suspends processing.

KNAN11110-I

Unsetup was canceled.

Reports that N or n was entered in response to the KNAN11009-Q message that was output when the unsetup command was executed.

S:
Suspends processing.

KNAN11111-I

The system database area of the IM database service will not be deleted.

Reports that the system database area will not be deleted. This message is output in the following cases:

  • The IM Configuration Management database was set up when the integrated monitoring database setup command is executed.
  • The integrated monitoring database was set up when the IM Configuration Management database setup command is executed.

S:
Continues processing.

KNAN11112-I

The IM database service will not be uninstalled.

Reports that the system database will not be uninstalled. This message is output in the following cases:

  • The IM Configuration Management database was set up when the integrated monitoring database setup command is executed.
  • The integrated monitoring database was set up when the IM Configuration Management database setup command is executed.

S:
Continues processing.

KNAN11113-E

The integrated monitoring database is not set up.

The integrated monitoring database area unsetup command was executed in an environment where only the IM Configuration Management database was set up.

S:
Suspends processing.

KNAN11114-E

Deletion of a system database area has failed.

An attempt to delete a system database area failed.

S:
Suspends processing.

O:
If another error message was output before this message, take the corrective action given for that message, and then re-execute the command. If no error message was output before this message, use the data collection tool to collect data, and then contact a system administrator.

KNAN11115-E

Uninstallation of the IM database service has failed.

An attempt to uninstall the IM database service failed.

S:
Suspends processing.

O:
If another error message was output before this message, take the corrective action given for that message, and then re-execute the command.
If the problem is not resolved, restart the computer, and then re-execute the command.
If the same message is output, use the data collection tool to collect data, and then contact a system administrator.

KNAN11116-E

An attempt to update the setup list has failed.

An attempt to update the setup list failed.

S:
Suspends processing.

O:
Use the data collection tool to collect data, and then contact a system administrator.

KNAN11117-E

The IM database service is running.

There was an attempt to uninstall the IM database service while the IM database service is running.

S:
Suspends processing.

O:
Use the data collection tool to collect data, and then contact a system administrator.

KNAN11118-E

The specified path is invalid.

The specified path is a relative path, and an invalid character is used as the path delimiter.

O:
Check the following items, and then re-execute the command.
  • Is a relative path specified?
  • Is the path delimiter character duplicated?
  • In Windows, does the file name end with a period followed by a space?

KNAN11119-W

Deletion of at least one file has failed. (directory name = directory-name)

An attempt to delete a file in the directory indicated in the message failed.

S:
Continues processing.

O:
Wait until the command has finished, and then delete the directory indicated in the message.

KNAN11120-E

Acquisition of a file has failed. (file name: file-name)

An attempt to acquire a file failed.

S:
Suspends processing.

O:
Check the indicated file, and then contact a system administrator.

KNAN11121-E

The IM configuration database is not set up.

The IM Configuration Management database area unsetup command was executed in an environment where only the integrated monitoring database has been set up.

S:
Suspends processing.

KNAN11122-E

Deletion of the integrated monitoring database area has failed.

An attempt to delete the integrated monitoring database area failed.

S:
Continues processing.

O:
Unset up both the integrated monitoring database area and the IM Configuration Management database, and then complete unsetup of the IM database.

KNAN11123-E

Deletion of the IM configuration database area has failed.

An attempt to delete the IM configuration database area failed.

S:
Continues processing.

O:
Unset up both the integrated monitoring database area and the IM Configuration Management database, and then complete unsetup of the IM database.

KNAN11124-I

The IM configuration database area of the IM database service will now be deleted.

Reports that the IM Configuration Management database area will be deleted.

S:
Continues processing.

KNAN11125-I

The IM configuration database area of the IM database service was deleted.

Reports that the IM Configuration Management database area was deleted.

S:
Continues processing.

KNAN11140-E

An error occurred while the IM database service was being installed. (error code: error-code)

An error occurred while the IM database service was being installed.

S:
Suspends processing.

O:
If another error message was output before this message, take the corrective action given for that message, and then re-execute the command.
If no error message was output before this message, check the following item:
  • Is the kernel parameter set appropriately?
If this does not resolve the problem, restart the system, and then re-execute the command.
If the same message is output, use the data collection tool to collect data, and then contact a system administrator.

KNAN11141-E

An error occurred while the system DB area was being created. (error code: error-code)

An error occurred while the system database area was being created.

S:
Suspends processing.

O:
Check the following items, perform unsetup, and then re-execute the command.
  • Does the file system of the path specified in IMDBDIR correspond to a large file?
  • Is the kernel parameter set appropriately?
  • Is a host name that does not exist specified in LOGICALHOSTNAME or ONLINEHOSTNAME?

KNAN11142-E

An error occurred while the IM database service was being uninstalled. (error code: error-code)

An error occurred while the IM database service was being uninstalled.

S:
Suspends processing.

O:
If another error message was output before this message, take the corrective action given for that message, and then re-execute the command. If no error message was output before this message, restart the system, and then re-execute the command. If the same message is output, use the data collection tool to collect data, and then contact a system administrator.

KNAN11143-E

Configuration of the IM database service is invalid.

The configuration of the IM database service is invalid.

S:
Suspends processing.

O:
Make sure that the IM database installation directory or data storage directory is accessible, and then re-execute the command. It the same message is output, unset up the IM database service, and then set it up again.

KNAN11144-W

Configuration of the IM database service is invalid.

This message is output when the IM database service file configuration is invalid during unsetup.

S:
Continues processing.

O:
Make sure that no files remain in the IM database installation directory or data storage directory. If any files remain, delete all of the files.
To complete unsetup of the IM database service, restart the system.

KNAN11145-E

The file or directory cannot be accessed. (path name = path-name)

The file or directory could not be accessed.

path-name: Path of the file or directory that could not be accessed

S:
Suspends processing.

O:
Determine whether the path indicated in the message can be accessed. If the path indicated in the message refers to a shared disk, determine whether the shared disk can be accessed.

KNAN11146-I

Logical host name: logical-host-name

Reports the logical host name of the IM database service to be created.

logical-host-name outputs the value specified in the LOGICALHOSTNAME parameter of the setup information file.

S:
Continues processing.

KNAN11147-I

Online host name: primary-system-host-name

Reports the primary system host name of the IM database service to be created.

primary-system-host-name outputs the value specified in the ONLINEHOSTNAME parameter of the setup information file.

S:
Continues processing.

KNAN11148-I

Logical host number: logical-host-number

Reports the logical host number of the IM database service to be created.

logical-host-number outputs the value specified in the LOGICALHOSTNUMBER parameter of the setup information file.

S:
Continues processing.

KNAN11150-I

The IM database service will now be backed up.

Reports that the IM database service will be backed up.

S:
Continues processing.

KNAN11151-I

The IM database service was successfully backed up.

Reports that the IM database service was backed up.

S:
Continues processing.

KNAN11152-E

An attempt to back up the IM database service has failed.

An attempt to back up the IM database service failed.

S:
Suspends processing.

O:
If another error message was output before this message, take the corrective action given for that message, and then re-execute the command.
If no error message was output before this message, use the data collection tool to collect data, and then contact a system administrator.

KNAN11153-I

The IM database service will now be recovered.

Reports that the IM database service will be recovered.

S:
Continues processing.

KNAN11154-I

The IM database service was successfully recovered.

Reports that the IM database service was recovered.

S:
Continues processing.

KNAN11155-E

Recovery of the IM database service has failed.

An attempt to recover the IM database service failed.

S:
Suspends processing.

O:
If another error message was output before this message, take the corrective action given for that message, and then re-execute the command.
If no error message was output before this message, use the data collection tool to collect data, and then contact a system administrator.

KNAN11156-E

The backup file does not exist.

The backup file specified using the -i option could not be found when the recovery command was executed.

S:
Suspends processing.

O:
Correct the backup file name specified using the -i option, and then re-execute the command.

KNAN11157-E

The specified recovery format is different from the format of the backup data.

This message is output in the following cases:

  • When the data backed up for use in failure recovery is specified in a recovery command used for extension.
  • When the data backed up for use in extension is specified in a recovery command used for failure recovery.

S:
Suspends processing.

O:
Correct the command parameter or the backup file, and then re-execute the command.

KNAN11158-I

The IM database service will now be reorganized.

Reports that the IM database service will be re-organized.

S:
Continues processing.

KNAN11159-I

The IM database service was successfully reorganized.

Reports that the IM database service was re-organized.

S:
Continues processing.

KNAN11160-E

Reorganization of the IM database service has failed.

An attempt to re-organize the IM database service failed.

S:
Suspends processing.

O:
If another error message was output before this message, take the corrective action given for that message, and then re-execute the command.
If no error message was output before this message, use the data collection tool to collect data, and then contact a system administrator.

KNAN11161-I

The unused area of the IM database service will now be deallocated.

Reports that the unused area of the IM database service will be de-allocated.

S:
Suspends processing.

KNAN11162-I

The unused area of the IM database service was successfully deallocated.

Reports that the unused area of the IM database service was de-allocated.

S:
Suspends processing.

KNAN11163-E

Deallocation of the unused area of the IM database service has failed.

An attempt to de-allocate the unused area of the IM database service failed.

S:
Suspends processing.

O:
If another error message was output before this message, take the corrective action given for that message, and then re-execute the command.
If no error message was output before this message, use the data collection tool to collect data, and then contact a system administrator.

KNAN11164-E

The configuration of the IM database service is different than from when the backup was performed.

The database size and setup configuration for when a recovery command is used for failure recovery does not match the configuration of the backup acquired for use in failure recovery.

S:
Suspends processing.

O:
Set up the database configuration the same as for when the backup is acquired for use in failure recovery, and then re-execute the command.

KNAN11165-E

A directory with the same name already exists. (directory name = directory-name)

A directory with the same name as the backup file already exists.

S:
Suspends processing.

O:
Revise the name of the backup file, and then re-execute the command.

KNAN11166-E

A directory cannot be specified.

The specified path refers to a directory.

S:
Suspends processing.

O:
Correct the path, and then re-execute the command.

KNAN11167-E

A UNC path name cannot be specified.

The specified path is in UNC path format.

S:
Suspends processing.

O:
Correct the path, and then re-execute the command.

KNAN11168-E

A stream name cannot be specified.

The specified path is in stream format.

S:
Suspends processing.

O:
Correct the path, and then re-execute the command.

KNAN11169-W

A backup file with the same name already exists. The existing file will be overwritten.

A file with the same name as the backup file to be output during execution of the backup command already exists. The existing file will be overwritten. After this message is output, a KNAN11009-Q message is output to query whether processing is to continue.

S:
Continues processing.

O:
To continue processing, enter Y or y in response to the KNAN11009-Q message that is output after this message. To stop processing, enter N or n in response to the KNAN11009-Q message that is output after this message.

KNAN11170-E

The specified path is too long. (path size = maximum-path-size)

The length of the specified path exceeds the maximum.

S:
Suspends processing.

O:
Correct the specified path, and re-execute the command.

KNAN11171-E

Creation of the directory for storing backup files has failed.

An attempt to create a directory for storing backup files specified using the backup command -o option failed.

S:
Suspends processing.

O:
Specify a directory that is able to store backup files, and then re-execute the command.

KNAN11172-E

An internal error occurred while the IM database service was being backed up.

An unexpected error occurred during backup processing of the IM database service.

S:
Suspends processing.

O:
Check the following items, and then re-execute the command:
  • Is the correct path specified as the output destination of the backup file?
  • Can the directory specified as the output destination of the backup file be written to?
  • Does a directory with the same name as the output destination of the backup file exist?

KNAN11173-E

An internal error occurred while the IM database service was being recovered.

An unexpected error occurred during recovery of the IM database service.

S:
Suspends processing.

O:
Check the following items, and then re-execute the command:
  • Is a backup file that was acquired from the same OS specified?
  • Are the backup acquisition time and database configuration the same?
  • For the MAINT parameter, is the setup information file of the current IM database the same as when the backup was acquired?
  • For the EXPAND parameter, is the current IM database smaller in size than when the backup was acquired?
  • For the EXPAND parameter, is recovery performed after the IM database was set up again? Does the IM database contain the old data?
  • For the EXPAND parameter, does the IM database installation directory contain sufficient free space?

KNAN11174-E

An internal error occurred while the IM database service was being reorganized.

An unexpected error occurred while the IM database service was being re-organized.

S:
Suspends processing.

O:
Make sure that there is sufficient free space in the IM database installation directory, and then re-execute the command.

KNAN11175-E

An internal error occurred while unused area of the IM database service was being deallocated.

An unexpected error occurred while unused area of the IM database service was being de-allocated.

S:
Suspends processing.

O:
Use the data collection tool to collect data, and then contact a system administrator.

KNAN11176-I

The backup was canceled.

This message is output when N or n is entered in response to the KNAN11009-Q message output during execution of the backup command.

S:
Suspends processing.

KNAN11177-I

The reorganization was canceled.

This message is output when N or n is entered in response to the KNAN11009-Q message output during execution of the re-organization command.

S:
Suspends processing.

KNAN11178-I

Deallocation of the unused area of the IM database service was canceled.

This message is output when N or n is entered in response to the KNAN11009-Q message output during execution of the unused area de-allocation command.

S:
Suspends processing.

KNAN11179-I

Processing to start the IM database service will now start.

Reports that processing to start the IM database service will start.

S:
Continues processing.

KNAN11180-I

Processing to start the IM database service ended normally.

Reports that processing to start the IM database service ended.

S:
Suspends processing.

KNAN11181-I

Processing to start or stop the IM database service is in progress.

Reports that processing to start or stop the IM database service is in progress.

S:
Suspends processing.

KNAN11182-I

The IM database service is running.

Reports that the IM database service is running.

S:
Suspends processing.

KNAN11183-I

The IM database service is stopped.

Reports that the IM database service stopped.

S:
Suspends processing.

KNAN11184-I

The IM database service started normally.

Reports that the IM database service started.

S:
Continues processing.

KNAN11185-I

Processing to stop the IM database service will now start.

Reports that processing to stop the IM database service will start.

S:
Continues processing.

KNAN11186-I

Processing to stop the IM database service ended normally.

Reports that processing to stop the IM database service ended.

S:
Suspends processing.

KNAN11187-I

The IM database service stopped normally.

Reports that the IM database service stopped.

S:
Continues processing.

KNAN11188-I

The status of the IM database service will now be confirmed.

Reports that the status of the IM database service will be confirmed.

S:
Continues processing.

KNAN11189-I

The status of the IM database service was successfully confirmed.

Reports that the status of the IM database service was confirmed.

S:
Suspends processing.

KNAN11190-W

The IM database service is stopped (restarting was interrupted).

The IM database service was suspended.

S:
Continues processing.

O:
Execute the jimdbstop -f command to forcibly stop the IM database service, and then restart the IM database.

KNAN11191-E

An internal error occurred during confirmation of the status of the IM database service.

An attempt to confirm the status of the IM database service failed.

S:
Suspends processing.

O:
Make sure that the IM database installation directory or the data storage directory can be accessed, and then re-execute the command. If the same message is output, perform unsetup on the IM database service, and then set it up again.

KNAN11192-E

Please execute this command from an administrator console.

The UAC user does not have Administrator permissions.

S:
Suspends processing.

KNAN11193-E

The IM database service is not set up. It is necessary to specify the option (option-name).

If the database is not set up, the -f option must be specified. The -s option cannot be specified.

S:
Suspends processing.

O:
Correct the parameter, and then re-execute the command.

KNAN11194-I

The recovery was canceled.

This message is output when N or n is entered in response to the KNAN11009-Q message output during execution of the recovery command.

S:
Suspends processing.

KNAN11195-E

The specified directory does not exist.

The specified directory does not exist.

S:
Suspends processing.

O:
Make sure that the directory indicated in the message exists.

KNAN11196-E

The directory for storing backup files does not exist.

The directory that stores the specified backup information file does not exist.

S:
Suspends processing.

O:
Make sure that the directory indicated in the message exists.

KFPH00212-I

Table should be reorganized,RDAREA="RD-area-name",AUTHID=authorization-identifier,TABLE=table-name

This message is output when re-organization of the IM Configuration Management database is required.

RD-area-name: Name of the RDAREA of the database that requires re-organization

authorization-identifier: JP1IMDB

table-name: Name of the table that requires re-organization

S:
Continues processing.

O:
Execute the re-organization command to re-organize the IM database service.

KFPH00213-W

All segments in RDAREA "RD-area-name" allocated

The RDAREA in the IM Configuration Management database is insufficient.

RD-area-name: Name of the RDAREA that is of insufficient size

S:
Suspends processing.

O:
Execute the free page de-allocation command or the re-organization command to allocate the free space in the IM database service.

KFPS01850-I

HiRDB system terminated. mode=termination-mode

Reports that the IM database service started normally.

termination-mode: Normal termination, planned termination, forcible termination

S:
Starts the IM database service normally.

KFPS05210-I

HiRDB system initialization process complete

Reports that the IM database service stopped.

S:
Stops the IM database service.

[Contents][Back][Next]

[Trademarks]

All Rights Reserved. Copyright (C) 2009, Hitachi, Ltd.