Job Management Partner 1/Integrated Management - Manager Messages

2.11 Messages related to IM Configuration Management - View (KNAN20000 to KNAN21999)

KNAN20000-E
A system error has occurred.
Detail code: detail-code

A system error occurred.

S:

Terminates IM Configuration Management - View.

O:

Use the data collection tool to collect data, and then contact a system administrator.

KNAN20001-E
Memory was insufficient.
Detail code: detail-code

Memory is insufficient.

S:

Continues processing.

O:

Make sure that there is sufficient memory, and then restart IM Configuration Management - View.

KNAN20002-E
A system error occurred when processing.

A system error occurred.

S:

Suspends processing.

O:

Use the data collection tool to collect data, and then contact a system administrator.

KNAN20003-I
The application terminated normally.

IM Configuration Management - View ended normally.

S:

Terminates IM Configuration Management - View.

KNAN20004-E
The application terminated abnormally.

IM Configuration Management - View ended abnormally.

S:

Terminates IM Configuration Management - View.

O:

Check the following items, and take correction action:

Determine whether IM Configuration Management Service started normally.

Take the corrective action indicated in the message prior to this message.

If this method cannot resolve the issue, use the data collection tool to collect data, and then contact a system administrator.

KNAN20005-E
An internal error occurred when processing.

An internal error occurred in IM Configuration Management - View.

S:

Continues IM Configuration Management - View processing.

O:

Use the data collection tool to collect data, and then contact a system administrator.

KNAN20006-E
Invalid data was received from the server when processing.

Invalid data was received from the server.

S:

Continues IM Configuration Management - View processing.

O:

Use the data collection tool to collect data, and then contact a system administrator.

KNAN20007-E
An error occurred for the command "processing".

A failure occurred during standby and stop processing.

S:

Continues IM Configuration Management - View processing.

O:

Use the data collection tool to collect data, and then contact a system administrator.

KNAN20008-E
An error occurred when processing.

An error occurred in IM Configuration Management - View.

S:

Continues IM Configuration Management - View processing.

O:

Use the data collection tool to collect data, and then contact a system administrator.

KNAN20010-E
Execution of the specified application failed.
Application: application-name
Detail code: detail-code

Execution of the application failed.

S:

Suspends execution of the application.

O:

Make sure that the application was correctly installed or set up, and then retry the operation.

KNAN20011-W
Since there is an error in the registry key, CF-View is started by using default value.
Registry key : registry-key-name

A registry value is incorrect.

S:

Starts IM Configuration Management - View.

O:

Make sure that an appropriate value is set in the registry, and then retry the operation.

KNAN20020-W
CF-View started by using the default values because a file could not be read.
File name: file-name
Detail code: detail-code

An error occurred while reading a file.

S:

Assumes the default value for the defined value and continues processing.

O:

Check the following items, and then retry the operation.

Is there sufficient memory?

Does the file exist?

Has the file access permission been set correctly?

Has the file been opened (locked) by another application?

KNAN20021-W
CF-View started by using the default values because there is an error in a file.
File name: file-name
Attribute name: attribute-name
Detail code: detail-code

An error occurred in the file contents.

S:

Assumes the default value for the defined value and continues processing.

O:

Make sure that the contents of the file are specified correctly, and then retry the operation.

KNAN20022-E
A file could not be created.
File name: file-name
Detail code: detail-code

A file could not be created.

S:

Suspends file creation.

O:

Check the following items, and then retry the operation:

Is there sufficient memory?

Has the directory access permission been set correctly?

Does the directory exist at the specified path?

Has the file been opened (locked) by another application?

Does the file name contain any of the following invalid characters?
/, :, ?, \", <, >, |, \\, *

KNAN20023-E
An error occurred when writing to a file.
File name: file-name
Detail code: detail-code

An error occurred while writing to a file.

S:

Suspends writing to the file.

O:

Check the following items, and then retry the operation:

Is there sufficient memory?

Has the file access permission been set correctly?

Has the file been opened (locked) by another application?

KNAN20024-E
An error occurred when deleting a file.
File name: file-name

An error occurred while deleting a file.

S:

Suspends file deletion.

O:

Check the following items, and then retry the operation:

Has the file access permission been set correctly?

Has the file been opened (locked) by another application?

KNAN20025-E
The content of the file is invalid.
File name: file-name
Attribute name: attribute-name

The contents of the help file contain an invalid value, or the file does not exist.

S:

Continues IM Configuration Management - View processing without displaying the online manual.

O:

Check the following items, and then retry the operation:

Are the attributes of the helpid.txt file valid?

Have the attributes of the helpid.txt file been specified correctly?

KNAN20026-E
An error occurred while reading a file.
File name: file-name
Detail code: detail-code

An error occurred while reading a help file.

S:

Continues IM Configuration Management - View processing without displaying the online manual.

O:

Check the following items, and then retry the operation:

Is there sufficient memory?

Does the help file exist?

Has the file access permission been set correctly?

KNAN20030-W
image-file was not found.
Path: path-name

An error occurred while displaying an image file.

S:

Continues processing without the image.

O:

Check the following items, and then retry the operation:

Does the file exist?

Has the file access permission been set correctly?

Has the file been opened (locked) by another application?

KNAN20040-E
An item was not input. Please input it, and then try again.
Item : input-item-name

A required input item was not input.

S:

Waits for re-entry of information.

O:

Input the required item, and then retry the operation.

KNAN20041-E
The format of an item is invalid. Please change the value of the item, and then try again.
Item: input-item-name

The format of an input item is invalid.

S:

Waits for re-entry of information.

O:

Change the value of the input item, and then retry the operation.

KNAN20042-E
The value of an item is outside the valid range. Please change the value of the item and then try again.
Item : input-item-name
Valid range: input-range

The value of an input item is outside the valid range.

S:

Waits for re-entry of information.

O:

Change the value of the input item, and then retry the operation.

KNAN20043-E
The number of values that can be set for an item has exceeded the upper limit. Please change the values of the item and then try again.
Item: input-item
Upper limit: upper-limit

The number of values that can be specified for an item exceeded the maximum.

S:

Waits for re-entry of information.

O:

Change the value of the input item, and then retry the operation.

KNAN20044-E
The invalid characters are input in the file name.
Please change the input value and re-execute.
Input Item : file-name

Invalid characters were used in the file name.

S:

Suspends processing.

O:

Check the following items, and then retry the operation:

Does the file name contain control characters?

Does the file name contain a reserved device name?

Does the file name contain any of the following invalid characters?
/, :, ?, \", <, >, |, \\, *

KNAN20050-W
The exclusive edit status of exclusive-data data was forcibly released by the user user-name:View-host-name.

Another user forcibly released exclusive edit status.

S:

Continues processing.

O:

Save the contents because the data being edited cannot be updated on the server. After saving the contents, close the editing window, and then re-open the window to acquire exclusive edit rights.

KNAN20051-E
Acquisition of information-name information failed. Please update to the latest information.

Acquisition of data from the server failed.

S:

Suspends processing.

O:

Make sure that the IM database server started normally, and then retry the operation.

If this method cannot resolve the issue, use the data collection tool to collect data, and then contact a system administrator.

KNAN20052-W
An error occurred in the initialization processing of the integrated trace log output.

An error occurred in the initialization processing of the integrated trace log output. Messages cannot be output to the integrated trace log.

S:

Continues processing.

O:

Determine whether the following service has been started:

Hitachi Network Objectplaza Trace Monitor 2

If it has not been started, start the service, and then restart IM Configuration Management - View.

KNAN20054-E
The IP address for the local host could not be found.

The IP address for the agent host could not be acquired.

S:

Suspends processing.

O:

Make sure that the local host resolves the IP address, and then retry the operation.

KNAN20055-E
The specified encoding "character-code" is not supported.

An unsupported character code was specified.

S:

Continues processing.

O:

Specify a supported character code.

KNAN20056-I
The latest status will be acquired because the IM Configuration and host list information has changed. If any processes are being executed, close them after closing this message.

The latest status will be acquired because the IM configuration (system hierarchy) or host list information changed.

KNAN20100-E
Address resolution for the specified connection destination host name failed.
Connection destination host name: connection-destination-host-name

Due to an error in the input for the connection host name, a connection could not be established with the connection host.

S:

Suspends processing.

O:

Make sure that the entered connection host name is correct, and then retry the operation.

KNAN20101-E
A connection to the specified connection destination host cannot be established. Confirm that the server has started up.
Connection destination host name: connection-host-name
Port number: port-number

A connection could not be established with the connection host because the connection host is not started.

S:

Suspends processing.

O:

Check the following items, and then retry the operation:

Was the connection host name input correctly?

Is the port number available for use?

Is the connection host started?

Is there a problem communicating with the connection host?

Use the jco_spmd_status command to confirm that the connection host has been started.

KNAN20102-E
A connection to the specified connection destination host cannot be established.
Connection destination host name: connection-host-name
Port number: port-number
Detail code: detail-code

A communication error occurred during connection to the host.

S:

Suspends processing.

O:

Check the following items, and then retry the operation:

Was the connection host name input correctly?

Is the port number available for use?

Is the connection host started?

Is there a problem communicating with the connection host?

Use the jco_spmd_status command to confirm that the connection host has been started.

KNAN20103-E
A communication error occurred while sending data.
Host name: connection-host-name
Port number: port-number
Detail code: detail-code

A communication error occurred while sending data.

S:

Suspends processing.

O:

Check the following items, and then retry the operation:

Was the connection host name input correctly?

Is the connection host started?

Is there a problem communicating with the connection host?

KNAN20104-E
A communication error occurred while receiving data.
Host name: connection-host-name
Port number: port-number
Detail code: detail-code

A communication error occurred while receiving data.

S:

Suspends processing.

O:

Check the following items, and then retry the operation:

Was the connection host name input correctly?

Is the port number available for use?

Is the connection host started?

Is there a problem communicating with the connection host?

Use the jco_spmd_status command to confirm that the connection host has been started.

KNAN20105-E
A timeout occurred during the wait for a response of request-name.
Connection destination host name: connection-host-name
Port number: port-number

A time-out occurred while waiting for a response.

S:

Suspends processing.

O:

Check the following items, wait awhile, and then retry the operation.

Is the connection host started?

Is there a problem communicating with the connection host?

If this message is output frequently, adjust the setting for the time-out value.

KNAN20200-E
The option "option" is invalid.

An invalid option was specified.

S:

Suspends processing.

O:

Specify the option correctly.

KNAN20201-E
The option "option" is duplicated.

Specification of the option was duplicated.

S:

Suspends processing.

O:

Specify the option correctly.

KNAN20202-E
Specify the value argument after the option "option".

The command cannot be executed because no argument value was specified after the displayed option.

S:

Suspends processing.

O:

Specify an argument value after the displayed option.

KNAN20203-E
The argument value of the option "option" includes an unusable character.

The argument value of the option includes an unusable character.

S:

Suspends processing.

O:

Specify the argument value correctly.

KNAN20204-E
The value specified in the argument of the option "option" exceeds the maximum value of maximum-value bytes.

The value specified in the argument value of the option exceeds the maximum length that can be specified.

S:

Suspends processing.

O:

Specify the argument value correctly.

KNAN20205-E
If you specify a password, also specify a host name and user name.

If you specify a password, you must also specify a host name and user name.

S:

Suspends processing.

O:

If a password is specified, also specify a host name and user name.

KNAN20206-E
The product information could not be acquired because there was not enough memory.
Detailed information: function-name, return-value

The product information could not be acquired because there were insufficient resources.

S:

Suspends processing.

O:

Make sure that there are sufficient system resources.

Eliminate any resource insufficiency, and then retry the operation.

If this method cannot resolve the issue, use the data collection tool to collect data, and then contact a system administrator.

KNAN20207-E
The product information could not be acquired because the environment is invalid.
Detailed information: function-name, return-value

The product information could not be acquired because the environment is invalid.

S:

Suspends processing.

O:

Determine whether a failure occurred in the system.

If a failure did not occur in the system, uninstall and then re-install IM Configuration Management - View, and then retry the operation.

If this method cannot resolve the issue, use the data collection tool to collect data, and then contact a system administrator.

KNAN20220-Q
Are you sure you want to log out?

Confirms that you want to log out.

O:

Click the Yes button to log out. Click the No button if you do not want to log out.

KNAN20221-Q
Do you want to delete the selected host?

Confirms that you want to delete the selected host.

O:

Click the Yes button to delete the selected host. Click the No button if you do not want to delete the selected host.

KNAN20222-Q
Do you want to collect the host information of the selected host?

Confirms that you want to collect the host information of the selected host.

O:

Click the Yes button to collect the host information of the selected host. Click the No button if you do not want to collect the host information of the selected host.

KNAN20223-Q
Do you want to acquire the IM configuration applied in the current system?
Acquiring the IM configuration will update the IM configuration on the server to the latest information.

Confirms that you want to apply the IM configuration (system hierarchy).

O:

Click the Yes button to acquire the IM configuration (system hierarchy). Click the No button if you do not want to acquire the IM configuration (system hierarchy).

KNAN20224-Q
Do you want to synchronize the IM configuration?
Synchronizing the IM configuration integrates separately created IM configurations.

Confirms that you want to synchronize the IM configuration (system hierarchy).

O:

Click the Yes button to synchronize the IM configuration (system hierarchy). Click the No button if you do not want to synchronize the IM configuration (system hierarchy).

KNAN20225-Q
Do you want to verify the IM configuration?
Verification of the IM configuration checks whether the IM configuration information set for each host in the IM configuration matches the IM configuration information on the server.

Confirms that you want to verify the IM configuration (system hierarchy).

O:

Click the Yes button to verify the IM configuration (system hierarchy). Click the No button if you do not want to verify the IM configuration (system hierarchy).

KNAN20226-Q
Do you want to perform a batch collection of the profile information?
This function collects the profile information of all hosts in the IM configuration.

Confirms that you want to perform a batch collection of the profile information.

O:

Click the Yes button to perform a batch collection of the profile information. Click the No button if you do not want to perform a batch collection of the profile information.

KNAN20227-Q
The configuration file will be applied to all hosts in the IM configuration. The date of the configuration files on the hosts will not be confirmed.
Do you want to continue?

Confirms that you want all of the profile information to be applied.

O:

Click the Yes button to have all of the profile information applied. Click the No button if you do not want to have all of the profile information applied.

KNAN20228-E
Startup of View of the base manager "host-name" failed.
Please confirm the following and then try again:
- IM-CF is set up in the base manager host.
- The service of the IM-CF server (jcfmain) has started on the base manager host.
- Login to the base manager host is possible with the currently logged in user name and password.

Startup of the site manager's IM Configuration Management - View failed.

S:

Suspends processing.

O:

Check the following items, and then retry the operation:

Is IM Configuration Management set up on the site manager host?

Has IM Configuration Management Service (jcfmain) started on the site manager host?

Is login allowed with the user name and password currently logged in to the site manager host?

KNAN20230-Q
IM configuration does not exist. Do you want to delete the IM configuration maintained in the Server?

There is no IM configuration (system hierarchy) on the agent host.

S:

Continues processing.

O:

Click the Yes button to delete the IM configuration (system hierarchy) saved on the server.

Click the No button if you do not want to delete the IM configuration (system hierarchy) saved on the server.

KNAN20300-E
primary-host and standby-host are the same. Specify different hosts, and then try again.

The primary host and the standby host are the same.

S:

Returns to the input window.

O:

Set the primary host and the standby host to different hosts, and then retry the operation.

KNAN20320-Q
A configuration file is being edited.
Are you sure you want to close the profile window?

Confirms that you want to close the Display/Edit Profiles window.

O:

Click the Yes button to close the Display/Edit Profiles window. Click the No button if you do not want to close the Display/Edit Profiles window.

KNAN20321-Q
Do you want to save the contents of the configuration file being edited to the server?
Even if the configuration file is saved, it will not be applied to product-name of the host "host-name".

Confirms that you want to save the configuration file to the server.

O:

Click the Yes button to save the configuration file to the server. Click the No button if you do not want to save the configuration file to the server.

KNAN20322-Q
Do you want to apply the configuration file to product-name of the host "host-name"?

Confirms that you want to apply the configuration file.

O:

Click the Yes button to apply the configuration file. Click the No button if you do not want to apply the configuration file.

KNAN20323-Q
Do you want to collect the profile profile-name for product-name of the host "host-name"?
Collecting the profile information updates the contents of the configuration file in the server to the latest information.

Confirms that you want to collect the profile information.

O:

Click the Yes button to collect the profile information. Click the No button if you do not want to collect the profile information.

KNAN20324-I
The configuration file of the profile profile-name for product-name of the host "host-name" was successfully saved in the server.

The configuration file was saved in the server.

KNAN20325-I
The configuration file of the profile profile-name for product-name was successfully applied to the host "host-name".

The configuration file was applied in the host.

KNAN20326-Q
Do you want to rebuild the profile tree of product-name of the host "host-name"?
When the profile tree is updated, the profiles of services that are not operated in the current agent host cannot be managed.

Confirms that you want to rebuild the profile tree.

O:

Click the Yes button to rebuild the profile tree. Click the No button if you do not want to rebuild the profile tree.

KNAN20329-Q
The configuration file of the profile profile-name has not been saved.
All changes will be lost. Do you want to continue?

Confirms that you want processing to continue.

O:

Click the Yes button to continue processing. Click the No button if you do not want to continue processing.

KNAN20330-E
The host "host-name" does not support individual collection of profile information.
Please execute the profile batch collection item from the main window.

The host does not support individual collection of profile information.

O:

Collect the profile information in batch from the IM Configuration Management window.

KNAN20331-E
The selected configuration file does not exist on the server. Please execute the profile batch collection item from the main window.

The configuration file does not exist on the server.

S:

Suspends processing.

O:

Collect the profile information in batch from the IM Configuration Management window.

KNAN20333-I
Setup file does not exist in agent host.

The configuration file does not exist in the agent host.

S:

Suspends processing.

O:

Make sure that the configuration file exists in the host.

KNAN20334-E
Control characters are present in the setup file.
Please remove the control characters and perform the operation again.

An attempt to save the configuration file or apply settings failed because the configuration file contains control characters.

S:

Suspends processing.

O:

Remove the control characters from the configuration file, and then retry the operation.

KNAN20400-Q
Do you want to replace the IM configuration information being edited?

Confirms that you want the existing IM configuration information (system hierarchy information) to be overwritten by the contents being edited.

O:

Click the Yes button to overwrite with the IM configuration information (system hierarchy information) being edited. Click the No button if you do not want to overwrite with the IM configuration information (system hierarchy information) being edited.

KNAN20401-Q
The read IM configuration information includes one or more hosts that are not registered in the host list. In order to continue, unregistered hosts must be registered in the host list.
Do you want to add the unregistered hosts to the host list?

Confirms that you want to add the unregistered hosts to the host list.

O:

Click the Yes button to add the unregistered hosts to the host list. Click the No button if you do not want to add the unregistered hosts to the host list and instead want to suspend reading of the file.

KNAN20402-E
The syntax of the IM configuration information in the specified file is invalid.
File name = file-name
Line number = line-number
Details = detailed-information

There is a syntax error in the file being read.

S:

Suspends processing.

O:

If the following detailed information is displayed, take the indicated corrective action, and then retry the operation.

Parentheses are not supported.
Remove the parentheses.

Unusable characters are being used.
Make sure that the following characters are not being used:
/, :, ?, \", <, >, |, \\, *

The host name is too long.
Specify the host name so that it does not exceed the maximum length.

An upper host has not been specified.
Define a host above the agent.

A manager host does not exist.
Make sure that the manager host is correctly defined.

The same host has been specified multiple times.
Specify a host only once.

The file is empty.
Define the IM configuration information (system hierarchy information).

The IM configuration of Base Manager is invalid.
Make sure that the IM configuration (system hierarchy information) of the site manager is correctly defined.

KNAN20403-Q
The IM configuration being edited has not been applied to the system.
Do you want to close the window for editing the IM configuration?

Confirms that you want to close the IM Configuration Management window.

O:

Click the Yes button to close the IM Configuration Management window. Click the No button if you do not want to close the IM Configuration Management window.

KNAN20404-Q
When the IM configuration is applied to the system, the existing configuration is deleted, and then the new configuration is distributed.
All of the hosts defined in the IM configuration must be running.
Do you want to apply the IM configuration?

Confirms that you want to apply the IM configuration information (system hierarchy information) to the system.

O:

Click the Yes button to apply the IM configuration information (system hierarchy information) to the system. Click the No button if you do not want to apply the IM configuration information (system hierarchy information) to the system.

KNAN20405-Q
In order to change the base manager, lower level hosts must be deleted.
Do you want to delete the lower level hosts?

Confirms that you want to delete lower level hosts to change to the site manager.

O:

Click the Yes button to delete the lower level hosts and change to the site manager. Click the No button if you do not want to delete the lower level hosts and change to the site manager.

KNAN20407-I
The latest configuration will be acquired because the IM configuration has been changed.

The update operation ended normally.

KNAN20408-I
The IM configuration was successfully saved.

The IM configuration (system hierarchy information) was saved.

KNAN20409-E
The selected node cannot be moved to its own child node.

The selected host cannot be moved to a lower level to the specified host.

S:

Suspends processing.

O:

Specify a host other than a lower level host as the move destination.

KNAN20410-Q
Do you want to delete the selected node?

Confirms that you want to delete the specified host.

O:

Click the Yes button to delete the host. Click the No button if you do not want to delete the host.

KNAN20411-E
The selected node cannot be moved to itself.

The host cannot be moved to itself.

S:

Suspends processing.

O:

Specify a host other than the move source as the move destination.

KNAN20412-E
Host exchange for the host "host-name" failed.
Please confirm the following and then try again:
- The host is registered.
- The host does not exist in the IM configuration.

Host exchange failed.

Check the following items, and then retry the operation:

Has a host name that is not registered in Host after the exchange been entered?

Has a host name that is not included in the system hierarchy been entered in Host after the exchange?

S:

Suspends processing.

O:

Check the following items, and then retry the operation:

Has the host been registered?

Is the host included in the IM configuration (system hierarchy)?

KNAN20413-I
The IM configuration tree has unregistered host (host-name) .Please register and perform [Update to latest host information] to continue.

One of the hosts in the host list was renamed or deleted while the IM Configuration Management window was being displayed.

KNAN20414-I
The host (host-name) is unregistered. Please register and perform [Update to latest host information] to continue.

After the IM Configuration Management window was updated to the most recent information, a renamed or deleted host was added.

KNAN20415-I
The host (host-name) in the IM configuration tree does not exist in the host list information. Please perform [Update to latest host information] to continue.

A host was newly registered and IM configuration acquisition was executed without updating the IM Configuration Management window to the most recent information.

KNAN20480-Q
Do you want to read the file "file-name"?

Confirms that you want to read the file.

O:

Click the Yes button to read the file. Click the No button if you do not want to read the file.

KNAN20481-Q
Do you want to save the file "file-name"?

Confirms that you want to save the file.

O:

Click the Yes button to save the file. Click the No button if you do not want to save the file.

KNAN20482-Q
Do you want to overwrite the file "file-name"?

Confirms that you want to overwrite the file.

O:

Click the Yes button to overwrite the file. Click the No button if you do not want to overwrite the file.

KNAN20483-E
An attempt to read data-name failed.
File name: file-name

An attempt to read the file failed.

S:

Suspends processing.

O:

Check the following items, and then retry the operation:

Does the file exist?

Has the file access permission been set correctly?

Has the file been opened (locked) by another application?

KNAN20484-E
An attempt to save data-name failed.
File name: file-name

An attempt to save the file failed.

S:

Suspends processing.

O:

Check the following items, and then retry the operation:

Is the disk space sufficient?

Is there sufficient memory?

Are the resources sufficient?

Does the file exist?

Has the file access permission been set correctly?

Has the file been opened (locked) by another application?

If this method cannot resolve the issue, use the data collection tool to collect data, and then contact a system administrator.

KNAN20500-Q
Do you want to forcibly release the exclusive edit status of the selected user?
If the exclusive edit status is forcibly released, data being edited might be lost.

Confirms that you want to forcibly release exclusive edit status.

O:

Click the Yes button to forcibly release exclusive edit status. Click the No button if you do not want to forcibly release exclusive edit status.

KNAN20510-I
process completed.

The process finished.

KNAN20513-Q
Do you want to interrupt process?

Confirms that you want to interrupt the process.

O:

Click the Yes button to interrupt the process. Click the No button if you do not want to interrupt the process.

KNAN20514-I
Processing to interrupt process completed.

Processing to interrupt the process finished.

KNAN20515-Q
The window for displaying execution results will close. Is this OK?

Confirms that you want to close the window.

O:

Click the Yes button to close the Execution Results window. Click the No button if you do not want to close the Action Log window.

KNAN20516-I
process cannot be interrupted because it has already completed.

The process cannot be interrupted because it has already finished.

KNAN20520-I
process. Please wait...

The process is currently communicating with the server.

O:

Wait until the server processing finishes.

KNAN20530-W
The topmost host is not a connection destination host.
If the topmost host is not a connection destination host, an error will occur when the IM configuration is applied.
Do you want to exchange hosts as specified?

The specified host is not the host connected to the highest-level host.

O:

Click the Yes button to continue host exchange. Click the No button to stop host exchange.

KNAN20800-E
Command execution failed. (Detailed information: API-name, error-code)

Command execution failed.

S:

Suspends command execution.

O:

Use the data collection tool to collect data, and then contact a system administrator.

KNAN20801-E
Command execution failed. (detail code = detail-code)

Command execution failed.

S:

Suspends command execution.

O:

Check the following items, and then retry the operation:

Is the disk space sufficient?

Is there sufficient memory?

KNAN20802-E
Please execute the command from an administrator console.

This command must be executed from an administrator console.

S:

Suspends command execution.

O:

Re-execute the command from an administrator console.

KNAN20803-E
Command execution failed because the user does not have execution permission.

Command execution failed because the user does not have execution permission.

S:

Suspends command execution.

O:

Log in as a user with Administrator permissions, and then execute the command.

KNAN20804-E
Failed to open the message file.

An attempt to open the message file failed.

S:

Suspends command execution.

O:

Use the data collection tool to collect data, and then contact a system administrator.

KNAN20805-E
Failed to load the message from the message file.

An attempt to read the message file failed.

S:

Suspends command execution.

O:

Use the data collection tool to collect data, and then contact a system administrator.

KNAN20810-I
A thread dump output request was sent.

A thread dump output request communication was completed.

S:

Terminates the command normally.

KNAN20811-E
Please specify the process ID and then try again.

The process ID was not specified.

S:

Suspends command execution.

O:

Specify the process ID, and then re-execute the command.

KNAN20812-E
Multiple process IDs were specified. Please correct the argument and then try again.

Multiple process IDs were specified.

S:

Suspends command execution.

O:

Specify a single process ID, and then re-execute the command.

KNAN20813-E
The specified process ID was invalid. Please correct the argument and then try again.

The process ID value is invalid.

S:

Suspends command execution.

O:

Make sure that the process ID is specified correctly, and then re-execute the command.

KNAN20814-E
Please specify the process ID of the IM configuration management/viewer and then try again.

The process ID of IM Configuration Management - View was not specified.

S:

Suspends command execution.

O:

Specify the process ID of IM Configuration Management - View.

KNAN20815-E
The jcfview process of the IM configuration management viewer is not running.

The jcfview process of IM Configuration Management - View is not running.

S:

Suspends command execution.

O:

Make sure that IM Configuration Management - View is running. Also make sure that the jcfview process (jcfview.exe) of IM Configuration Management - View is running.

KNAN20816-E
Transmission of a thread dump output request failed.

Transmission of a thread dump output request failed.

S:

Suspends command execution.

O:

Make sure that the jcfview_evt process (jcfview_evt.exe) of IM Configuration Management - View is running.

KNAN20820-I
Setup terminated normally.

Setup finished normally.

S:

Terminates the command normally.

KNAN20821-I
Unsetup terminated normally.

Unsetup finished normally.

S:

Terminates the command normally.

KNAN20822-E
An invalid parameter was specified.

An invalid option was specified in a parameter of the jcovcfsetup setup command.

S:

Suspends command execution.

O:

Specify a valid option in the parameter of the jcovcfsetup setup command. The valid options are the following:

For setup processing, specify jcovcfsetup -i or jcovcfsetup.

For unsetup processing, specify jcovcfsetup -u.

KNAN20823-E
Command execution failed because acquisition of JP1/IM - View installation information failed.

Command execution failed because collection of IM Configuration Management - View installation information failed.

S:

Suspends command execution.

O:

Make sure that IM Configuration Management - View was installed correctly, and then retry the operation.

KNAN20824-E
Setup cannot be performed because the shortcut destination does not exist.

The jcovcfsetup setup command cannot add a shortcut because the IM Configuration Management - View program folder does not exist.

S:

Suspends command execution.

O:

Install IM Configuration Management - View, make sure that the position and name of the IM Configuration Management - View menu displayed when you click Start and then Programs have not been changed, and then retry the operation.

KNAN20825-E
Unsetup failed. (Detailed information: API-name, error-code)

Unsetup failed.

S:

Suspends command execution.

O:

Use the data collection tool to collect data, and then contact a system administrator.

KNAN20826-E
Setup failed. (Detailed information : API-name, error-code)

Setup failed.

S:

Suspends command execution.

O:

Use the data collection tool to collect data, and then contact a system administrator.

KNAN21000-E
The number of connections to the server exceeds the maximum value of maximum-number-of-connections.

The number of connections to the server exceeded the maximum.

S:

Suspends processing.

O:

Reduce the number of connections to the server so that there are no more than the maximum.

KNAN21001-E
User authentication failed.
Confirm the specified user name and password, and then try again.

User authentication failed.

S:

Suspends processing.

O:

Check the user name and password, and then retry the operation.

KNAN21002-E
A communication error occurred between the specified connection destination host and authentication server.

Login failed because a connection with the authentication server could not be made.

S:

Suspends processing.

O:

Make sure that there is no error in the setting for the authentication server on the connection destination host.

KNAN21003-E
A login operation failed.

Login failed.

S:

Suspends processing.

O:

Check the following items, and then log in again.

Was the connected host name input correctly?

Is the port number a usable port?

Has the connected host been started?

Is there a problem communicating with the connected host?

Use the jco_spmd_status command to confirm that the connected host was started.

KNAN21004-E
A communication error occurred between the connected host and the authentication server during logout.

Login failed due to an authentication server access error.

S:

Suspends processing.

O:

Make sure that there is no error in the setting for the authentication server on the connection destination host.

KNAN21005-E
A logout operation failed.

Logout failed.

S:

Suspends processing.

O:

Make sure that there is no error in the setting for the authentication server on the connected host.

KNAN21054-E
The service information collection is failed for the host (host-name). Please execute host information collection.
(Cause: Host information in DB and real system are different.)

Collection of the service information failed because the primary system host information does not match the IM Configuration Management database.

S:

Suspends processing.

O:

Collect the host information, and then retry the operation.

KNAN21055-E
Application of the IM configuration failed.
Details: A host that is not a connection-destination host has been specified for the top-level host.

An attempt to apply the IM configuration (system hierarchy) failed because a host other than the host connected to the highest-level host was specified.

S:

Suspends processing.

O:

Specify the host connected to the highest-level host, and then retry the operation.

KNAN21151-E
The collection of profile list is failed.
Get the latest information and confirm whether the host exists.

The host was not found in the IM Configuration Management database.

S:

Suspends processing.

O:

Make sure that the host has been registered, and then retry the operation.

KNAN21154-E
The collection of operation definition information is failed.
Get the latest information and confirm whether the host exists.

The specified host was not found in the host list.

S:

Suspends processing.

O:

Make sure that the host has been registered, and then retry the operation.

KNAN21157-E
The collection of Configuration file content is failed.
Get the latest information and confirm whether the host exists.

The specified host was not found in the host list.

S:

Suspends processing.

O:

Make sure that the host has been registered, and then retry the operation.

KNAN21162-E
Batch collection for the host failed.
Get the latest information and confirm whether the host exists.

Batch collection for the host failed because the specified host does not exist.

S:

Suspends processing.

O:

Make sure that the host has been registered, and then retry the operation.

KNAN21165-E
Application of the configuration files failed.
Update the information, and then confirm whether the host exists.

The specified host was not found in the host list.

S:

Suspends processing.

O:

Make sure that the host has been registered, and then retry the operation.

KNAN21168-E
Batch application of the profiles failed.
Update the information, and then confirm whether the host exists.

The specified host was not found in the host list.

S:

Suspends processing.

O:

Make sure that the host has been registered, and then retry the operation.

KNAN21169-E
Acquisition of exclusive edit rights failed.Get the latest information and confirm whether the host exists.

Acquisition of exclusive edit rights failed.

S:

Suspends processing.

O:

Make sure that the host has been registered, and then retry the operation.

KNAN21170-W
The configuration file "file name" for profile type on the agent host might have been changed.
Do you want to apply the changes?

The configuration file may have been overwritten by another user.

S:

Continues processing.

O:

Check the contents of the definition file from the agent side, and then continue the update.

KNAN21171-E
Request name cannot be executed.
Details: detailed information
Close all of the Profile Display/Edit windows, apply the IM configuration, and then try again.

The request request-name cannot be executed.

S:

Suspends processing.

O:

If the following detailed information is displayed, take the indicated corrective action.

The specified product is not supported.
Make sure that the JP1/Base version is 09-00 or later.

The IM configuration has not been applied.
Apply the IM configuration (system hierarchy) from the IM Configuration Management window, and then retry the operation.

KNAN21172-E
The request-name cannot be executed because the database was updated.
Please close all the opened profile windows and invoke again after refreshing the main window.

The request request-name cannot be executed.

S:

Suspends processing.

O:

Close all Display/Edit Profiles windows, update the IM Configuration Management window to the most recent information, and then retry the operation.

KNAN21173-E
Saving the configuration file in server is failed.
Get the latest information and confirm whether the host exists.

The configuration file could not be saved on the server.

S:

Suspends processing.

O:

Update the IM Configuration Management window to the most recent information, and then confirm that the host has been registered.

KNAN21174-E
Application of changes failed because an error occurred when moving the configuration file (file-name) for profile-type.
Detail Information: detailed-information
Edited contents might be stored in host "host-name" because rollback of configuration file is also failed.

Changes could not be applied because an attempt to move the configuration file failed.

Another possibility is that an attempt to roll back the configuration file failed because the host version is 08-50 or earlier.

S:

Suspends processing.

O:

If the following detailed information is displayed, take the indicated corrective action.

There is no access permission.
Make sure that there is access permission to the host.

Another session has exclusive rights.
In the Login User List window, determine whether the user has acquired exclusive permission.
If it is not problematic to do so, select the check box next to the user that has acquired exclusive permission, and then click the Release Exclusive Editing button to release exclusive permission.

The directory does not exist.
Make sure that the directory exists and that it is accessible.

A required service or process is not running.
Make sure that the relevant service or process is running. If it is not running, take the following actions, and then retry the operation.
Start the service or process.
In the Display/Edit Profiles window, click Operation, and then Rebuild Profile Tree.

A communication error occurred.
Determine whether the relevant host exists.
If the host exists, make sure that the network is available.

The processing is busy. Please try again.
Wait awhile, and then retry the operation.

A service or process failed to reload.
Make sure that the relevant service or process is running and that the configuration file is correctly formatted.
If it is not running, take the following actions, and then retry the operation.
Start the service or process.
In the Display/Edit Profiles window, click Operation, and then Rebuild Profile Tree.

If detailed information other than the above is output, use the data collection tool to collect data, and then contact a system administrator.

KNAN21175-E
The log file trap failed to be applied because an error occurred when the reload command was executed.
Error code: error code. For details, see the description of the jevlogreload command in the JP1/Base manual.
The configuration file "file name" on the host "host name" will be returned to the state it was in after the changes had been made because the configuration file failed to be rolled back.

Application of settings to the log file trap failed because an error occurred during execution of the reload/startup command.

For details, check the JP1/Base manuals (jevlogstart command, jevlogreload command) and refer to the error message for the displayed error code.

Another possibility is that an attempt to roll back the configuration file failed because the host version is 08-50 or earlier.

S:

Suspends processing.

O:

Take the following actions:

Check the details of the error code displayed in the message in the JP1/Base manuals (jevlogstart command, jevlogreload command), and take corrective action.

Confirm that the configuration information is valid, edit the configuration file, and then reload.

KNAN21176-E
Application of changes to the configuration file (file-name) for profile-type failed.
Cause: detailed-information
Edited contents might be stored in host "host-name" because rollback of configuration file also failed.

Changes to the configuration file could not be applied.

Another possibility is that an attempt to roll back the configuration file failed because the host version is 08-50 or earlier.

S:

Suspends processing.

O:

Confirm that the configuration information is valid, edit the configuration file, and then reload.

If the following detailed information is displayed, take the indicated corrective action.

Operations cannot be performed on the file.
Check the following items, and then retry the operation.
Is there sufficient memory?
Does the file exist?
Has the file access permission been set correctly?
Has the file been opened (locked) by another application?

The file name is too long.
Shorten the file name or the path, and then retry the operation.

A required service or process is not running.
Make sure that the relevant service or process is running. If it is not running, take the following actions, and then retry the operation.
Start the service or process.
In the Display/Edit Profiles window, click Operation, and then Rebuild Profile Tree.

The configuration file for rollback failed to be created.
Make sure that there is sufficient disk space, memory, or other OS resources.

The data that was acquired while connected to the host is invalid.
Invalid data may have been received temporarily. Retry the operation.
Also check the network configuration and status with the acquired host.

There might be a mistake in a configuration file definition, or JP1/Base might not be running properly.
Make sure that the relevant service or process is running and that the configuration file is configured correctly.
If it is not running, take the following actions, and then retry the operation.
Start the service or process.
In the Display/Edit Profiles window, click Operation, and then Rebuild Profile Tree.

A request was executed in an invalid operating environment.
It is possible that the IM configuration (system hierarchy) has been deleted.
Click Operation, and then Verify IM Configuration to confirm that the current configuration is correct.

If detailed information other than the above is output, use the data collection tool to collect data, and then contact a system administrator.

KNAN21177-E
Application of changes to the configuration file for setup-file-name of "profile-type" failed. (Cause: detailed-information)
The rollback function of the configuration file is not supported for JP1/Base version of host "host-name". Edited contents might be stored in host "host-name".

Changes to the configuration file could not be applied.

Another possibility is that an attempt to roll back the configuration file failed because the host version is 08-50 or earlier.

S:

Suspends processing.

O:

Confirm that the configuration information is valid, edit the configuration file, and then reload.

If the following detailed information is displayed, take the indicated corrective action.

A required service or process is not running.
Make sure that the relevant service or process is running. If it is not running, take the following actions, and then retry the operation.
Start the service or process.
In the Display/Edit Profiles window, click Operation, and then Rebuild Profile Tree.

The configuration file for rollback failed to be created.
Make sure that there is sufficient disk space, memory, or other OS resources.

The data that was acquired while connected to the host is invalid.
Invalid data may have been received temporarily. Retry the operation.

There might be a mistake in a configuration file definition, or JP1/Base might not be running properly.
Make sure that the relevant service or process is running and that the configuration file is configured correctly.
If it is not running, take the following actions, and then retry the operation.
Start the service or process.
In the Display/Edit Profiles window, click Operation, and then Rebuild Profile Tree.

Operations cannot be performed on the file.
Check the following items, and then retry the operation.
Is there sufficient memory?
Does the file exist?
Has the file access permission been set correctly?
Has the file been opened (locked) by another application?

The file name is too long.
Shorten the file name or the path, and then retry the operation.

A request was executed in an invalid operating environment.
It is possible that the IM configuration (system hierarchy) has been deleted.
Click Operation, and then Verify IM Configuration to confirm that the current configuration is correct.

If detailed information other than the above is output, use the data collection tool to collect data, and then contact a system administrator.

KNAN21178-E
Application of changes failed for the configuration file (file-name) for profile-type.
Detail Information: detailed-information
Reload with old configuration file is also failed.

An attempt to apply changes to the configuration file failed.

S:

Suspends processing.

O:

Confirm that the configuration information is valid, edit the configuration file, and then reload.

If the following detailed information is displayed, take the indicated corrective action.

Operations cannot be performed on the file.
Check the following items, and then retry the operation.
Is there sufficient memory?
Does the file exist?
Has the file access permission been set correctly?
Has the file been opened (locked) by another application?

The file name is too long.
Shorten the file name or the path, and then retry the operation.

A required service or process is not running.
Make sure that the relevant service or process is running. If it is not running, take the following actions, and then retry the operation.
Start the service or process.
In the Display/Edit Profiles window, click Operation, and then Rebuild Profile Tree.

The configuration file for rollback failed to be created.
Make sure that there is sufficient disk space, memory, or other OS resources.

The data that was acquired while connected to the host is invalid.
Invalid data may have been received temporarily. Retry the operation.
Also check the network configuration and status with the acquired host.

There might be a mistake in a configuration file definition, or JP1/Base might not be running properly.
Make sure that the relevant service or process is running and that the configuration file is configured correctly.
If it is not running, take the following actions, and then retry the operation.
Start the service or process.
In the Display/Edit Profiles window, click Operation, and then Rebuild Profile Tree.

A request was executed in an invalid operating environment.
It is possible that the IM configuration (system hierarchy) has been deleted.
Click Operation, and then Verify IM Configuration to confirm that the current configuration is correct.

If detailed information other than the above is output, use the data collection tool to collect data, and then contact a system administrator.

KNAN21179-E
The log file trap failed to be applied because an error occurred when the reload command was executed.
Error code: error code
The configuration file, which was rolled back, failed to be reloaded.

Application of settings to the log file trap failed because an error occurred during execution of the reload command.

S:

Suspends processing.

O:

Take one of the following actions:

Refer to the jevlogreload command in the JP1/Base manuals, and check the error code details.

Edit the configuration file with valid configuration information, and then retry the operation.

[Contents][Back][Next]

[Trademarks]