Job Management Partner 1/Integrated Management - Manager Messages

2.9 Messages related to installation and setup (KAVB9001 to KAVB9999)

KAVB9032-E
An attempt to switch the action information file has failed. (code = maintenance-code)

An attempt to move the action information file failed.

S:

Continues installation.

O:

Take corrective action according to the maintenance code.

Maintenance code: 2
Error type: A failure occurred during move processing
Corrective action: Use the data collection tool to collect data, and then contact a system administrator. Inform the administrator of the maintenance code.

Maintenance code: 3
Error type: I/O error
Corrective action: Use the data collection tool to collect data, and then contact a system administrator. Inform the administrator of the maintenance code.

Maintenance code: 4
Error type: Memory error
Corrective action: Stop all applications not in use after installation finishes or after cluster version upgrade finishes. Then re-execute the installation or cluster version upgrade.

KAVB9033-I
The switch of the action information file has finished.

The move of the action information file is complete.

S:

Continues installation.

KAVB9034-E
An attempt to change the permission for the file [file-name] has failed.

An attempt to change permission for a file [file-name] failed.

S:

Suspends setup and installation.

O:

Check the following items:

Is JP1/IM - Manager running?

Is there sufficient disk space and available memory?

After taking corrective action for the above causes, set up and install JP1/IM - Manager again.

KAVB9035-E
An attempt to copy the file [file-name] has failed.

An attempt to copy the file [file-name] failed.

S:

Suspends setup and installation.

O:

Check the following items:

Is JP1/IM - Manager running?

Is there sufficient disk space and available memory?

After taking corrective action for the above causes, set up and install JP1/IM - Manager again.

KAVB9036-E
The file [file-name] does not exist.

The file [file-name] does not exist.

S:

Suspends setup and installation.

O:

Check the following items:

Does the file [file-name] exist?

Is there sufficient disk space and available memory?

After taking corrective action for the above causes, install JP1/IM - Manager again.

KAVB9051-I
The Central Console Service setup will now start.

JP1/IM - Manager setup will start.

S:

Starts JP1/IM - Manager setup.

KAVB9053-I
The file [file-name] was relocated.

The definition file [file-name] was moved.

S:

Moves the definition file [file-name].

KAVB9054-E
'/opt/jp1base/bin/jbssetcnf' could not be executed.

The /opt/jp1base/bin/jbssetcnf command could not be executed.

S:

Suspends setup.

O:

Determine whether you can execute the /opt/jp1base/bin/jbssetcnf command.

If the file does not exist, re-install JP1/Base, and then set it up again.

Make sure that you can execute the /opt/jp1base/bin/jbssetcnf command, and then set up JP1/IM - Manager again.

KAVB9056-I
[file-name] was registered to the common definition.

[file-name] was registered as a common definition.

S:

Registers [file-name] as a common definition.

KAVB9057-E
[file-name] could not be registered to the common definition.

[file-name] could not be registered as a common definition.

S:

Suspends setup.

O:

Check the contents of [file-name], and then set up JP1/IM - Manager again.

If there are no errors in [file-name], re-install JP1/Base, and then set it up again.

KAVB9059-I
The registration of the common definition data has completed.

Registration of the common definition information is complete.

KAVB9064-I
The Central Console Service setup has completed.

Setup of JP1/IM - Manager is complete.

S:

Completes setup of JP1/IM - Manager.

KAVB9072-I
The Central Console Service Cluster environment setup will now start.

Setup of the JP1/IM - Manager cluster environment will start.

S:

Starts setup of the JP1/IM - Manager cluster environment.

KAVB9073-I
The logical host setup processing will now start.

Setup processing for the logical host will start.

S:

Starts setup processing for the logical host.

KAVB9074-E
An attempt to get the configuration data of the physical host failed.

An attempt to acquire the common definition information of the physical host failed.

S:

Suspends cluster setup.

O:

Make sure that the shared disk can be accessed.

Make sure that the jbsgetcnf command can be executed.

If the file does not exist, re-install JP1/Base, and then set it up again.

Confirm that the jbsgetcnf command can be executed, and then perform cluster setup of JP1/IM - Manager again.

KAVB9075-E
The configuration data could not be registered.

The configuration data could not be registered.

S:

Suspends setup.

O:

Make sure that the jbssetcnf command can be executed.

If the file does not exist, re-install JP1/Base, and then set it up again.

Confirm that the jbssetcnf command can be executed, and then perform cluster setup of JP1/IM - Manager again.

KAVB9076-I
The configuration files of the physical host will now be copied to the shared disk.

Copies the definition files of the physical host to the shared disk.

KAVB9077-E
The folder [shared-disk]/jp1cons/conf could not be created on the shared disk.

A folder could not be created on the shared disk.

S:

Suspends cluster setup.

O:

Make sure that the shared disk can be accessed.

Confirm that the shared disk can be accessed, and then perform cluster setup of JP1/IM - Manager again.

KAVB9078-I
The IP address will now be bound to the TCP/IP socket.

Binds the IP address to the TCP/IP socket.

S:

Binds the IP address to the TCP/IP socket.

KAVB9079-I
The acquisition of the shared disk name will now start.

Processing to acquire the shared disk name will start.

S:

Starts processing to acquire the shared disk name.

KAVB9080-E
An attempt to get the [logical-host] configuration data failed.

An attempt to acquire common definition information failed.

S:

Suspends cluster setup.

O:

Make sure that the shared disk can be accessed.

Make sure that the jbsgetcnf command can be executed.

If the file does not exist, re-install JP1/Base, and then set it up again.

Confirm that the jbsgetcnf command can be executed, and then perform cluster setup of JP1/IM - Manager again.

KAVB9101-I
The upgrading of the logical host environment will now start.

Upgrading of the logical host environment version will start.

S:

Starts upgrading the logical host environment version.

KAVB9102-I
The upgrading of the logical host environment has finished.

Upgrading of the logical host environment version is complete.

S:

Terminates processing.

KAVB9103-E
A specified argument is invalid.

A specified argument is invalid.

S:

Aborts processing.

O:

Specify a valid argument, and then retry the operation.

KAVB9104-E
A specified logical host name is invalid.

The specified logical host name is invalid.

S:

Aborts processing.

O:

Specify a valid logical host name, and then retry the operation.

KAVB9105-E
An attempt to upgrade the logical host environment has failed.

An attempt to upgrade the logical host environment version failed.

S:

Aborts processing.

O:

Take the corrective action given for the message that was output preceding this message.

KAVB9106-E
The file "file-name" could not be copied.

An attempt to copy a file (including folders and directories) failed.

S:

Aborts processing.

O:

Check the following items, and then retry the operation.

Is JP1/IM - Manager running?

Can the shared disk be accessed?

Does the user have write permission for the shared disk?

Is another application using JP1/IM - Manager files?

Is there sufficient disk space and available memory?

Was the operation executed with Administrator permissions (in Windows) or superuser permission (in UNIX)?

KAVB9107-E
The file "file-name" could not be created.

An attempt to create a file (including folders and directories) failed.

S:

Aborts processing.

O:

Check the following items, and then retry the operation.

Is JP1/IM - Manager running?

Can the shared disk be accessed?

Does the user have write permission for the shared disk?

Is another application using JP1/IM - Manager files?

Is there sufficient disk space and available memory?

Was the operation executed with Administrator permissions (in Windows) or superuser permission (in UNIX)?

KAVB9108-E
The configuration definition "common-definition-file-name" could not be registered. (detail-code)

An attempt to save common definitions failed for the following reason.

If detail-code is 900012000, the common definition file could not be read.

If detail-code is 900012002, the jbssetcnf command could not be executed.

S:

Aborts processing.

O:

Check the following items, and then retry the operation.

Is JP1/IM - Manager running?

Can the shared disk be accessed?

Does the user have write permission for the shared disk?

Is another application using JP1/IM - Manager files?

Is there sufficient disk space and available memory?

Was the operation executed with Administrator permissions (in Windows) or superuser permission (in UNIX)?

KAVB9109-E
The system environment could not be set. (detail-code)

An attempt to set up the system environment failed for the following reason.

If detail-code is 900011000, the configuration file (Windows: console-path\conf\jp1co_spmd.conf; UNIX: /etc/opt/jp1cons/conf/jp1co_spmd.conf) could not be read.

If detail-code is 900011001, there was an error in the options specified for the configuration file (Windows: console-path\conf\jp1co_spmd.conf; UNIX: /etc/opt/jp1cons/conf/jp1co_spmd.conf).

If detail-code is 900011002, the jcoimdef command could not be executed.

S:

Aborts processing.

O:

If detail-code is 900011000 or 900011002, check the following items, and then retry the operation.

Is JP1/IM - Manager running?

Can the shared disk be accessed?

Does the user have write permission for the shared disk?

Is another application using JP1/IM - Manager files?

Is there sufficient disk space and available memory?

Was the operation executed with Administrator permissions (in Windows) or superuser permission (in UNIX)?

If detail-code is 900011001, check the options of the configuration file (Windows: console-path\conf\jp1co_spmd.conf; UNIX: /etc/opt/jp1cons/conf/jp1co_spmd.conf), and then retry the operation.

KAVB9110-E
Insufficient memory has occurred.

There is insufficient memory.

S:

Aborts processing.

O:

Increase available memory by stopping other applications, and then retry the operation.

KAVB9111-E
An attempt to restore the logical host environment has failed.

An attempt to restore the original logical host environment after processing was suspended due to an error failed.

S:

Aborts processing.

O:

In Windows:
Confirm that the backup file is in the shared-folder\jp1cons\tmp\conf\ folder, and then perform the following operations.
1. Delete shared-folder\jp1cons\conf\ from each folder.
2. Move shared-folder\jp1cons\tmp\conf\ to shared-folder\jp1cons\conf\.
3. Remove the causes of other errors that occurred at the same time, and then retry the operation.

In UNIX:
Confirm that shared-directory/jp1cons/tmp/conf/ is in the backup file, and then perform the following operations.
1. Delete shared-directory/jp1cons/conf/ from each directory.
2. Move shared-directory/jp1cons/tmp/conf/ to shared-directory/jp1cons/conf/.
3. Remove the causes of other errors that occurred at the same time, and then retry the operation.

KAVB9112-E
Only one jp1cohaverup command can be executed at one time. Alternatively, a backup file remains from the last execution time.

A cluster environment move command is being executed. Another possibility is that the previous execution of a cluster environment move command was suspended, so a backup file still exists.

S:

Aborts processing.

O:

Multiple cluster environment move commands cannot be executed simultaneously. If a cluster environment move command is being executed, wait for processing to finish, and then retry the operation.

If the previous backup file still exists, perform the following operations, and then retry the operation.

In Windows:
1. Delete shared-folder\jp1cons\conf\ from each folder.
2. Move shared-folder\jp1cons\tmp\conf\ to shared-folder\jp1cons\conf\.

In UNIX:
1. Delete shared-directory/jp1cons/conf/ from each directory.
2. Move shared-directory/jp1cons/tmp/conf/ to shared-directory/jp1cons/conf/.

KAVB9113-E
Failed to acquire information about the host that was specified by the common definition information [key-value].

An attempt to acquire information about the host specified by the common definition information (key-value) failed.

The following items are displayed as key-value.

\\JP1DEFAULT\CONSOLE_MANAGER\CONF_DIR

\\host-name\CONSOLE_MANAGER\CONF_DIR

\\host-name\CONSOLE_MANAGER\JP1CONS_WORK PATH

\\host-name\CONSOLE_MANAGER\JP1CONS_LOGDIR

S:

Aborts processing.

O:

Use the data collection tool to collect data, and then contact a system administrator.

KAVB9114-E
Failed to acquire the installation path from the registry [product-name].

An attempt to acquire an installation path from the registry failed.

S:

Aborts processing.

O:

Use the data collection tool to collect data, and then contact a system administrator.

KAVB9115-E
No permission for execution.

The user does not have permission to execute the command.

S:

Aborts processing.

O:

Log in again as a user with Administrator or similar execution permissions, and then retry the operation.

KAVB9116-W
Failed to delete the temporary file created during processing. (file-name)

A temporary file created for move processing could not be deleted.

S:

Continues processing.

O:

Delete the indicated file.

KAVB9117-I
An attempt to restore the logical host environment will now start.

Environment recovery processing will start.

S:

Starts environment recovery processing.

KAVB9118-I
An attempt to restore the logical host environment has finished.

Environment recovery processing is complete.

S:

Terminates environment recovery processing.

KAVB9119-E
An attempt to switch the extended startup process definition file has failed. (code = code)

An attempt to move the extended startup process definition file failed.

S:

Continues processing.

O:

Check the maintenance code, and then retry the overwrite installation.

KAVB9120-E
An attempt to switch the extended startup process definition file has failed. Installation will continue using the pre-installation settings file. Please re-install product-name, using an overwrite installation. (code = maintenance-code)

An attempt to create an extended startup process definition file failed. Restore the original file, and then continue processing.

S:

An attempt to create a file failed. Restores the existing file and continues processing.

O:

Make sure that the attribute of the extended startup process definition file is not a read attribute, and then re-install the product.

KAVB9121-I
The switch of the extended startup process definition file has finished.

The move of the extended startup process definition file is complete.

S:

Terminates processing.

KAVB9201-I
The service dependencies were successfully changed.

The service dependencies were successfully changed.

S:

Terminates command processing.

KAVB9202-E
An attempt to change the service dependencies has failed. (details = detailed-information)

An attempt to change the service dependencies failed.

S:

Terminates command processing.

O:

Check the following items according to the detailed information that is displayed:

detailed-information: You do not have the required execution permissions.
Corrective action: Execute the command again as a user with Administrator permissions.

detailed-information: The service does not exist.
Corrective action: The JP1/IM - Manager service is not registered. Make sure that the JP1/IM - Manager service is registered, and then retry the operation.
If the JP1/IM - Manager service is not registered, re-install JP1/IM - Manager.

detailed-information: Other
Corrective action: Use the data collection tool to collect data, and then provide the detailed information to a system administrator.

KAVB9301-E
The product information could not be acquired because there was not enough memory. (Detailed information: function-name, return-value)

An attempt to acquire product information failed due to insufficient resources.

S:

Suspends processing.

O:

Make sure that there are sufficient system resources.

Resolve the resource insufficiency, and then retry the operation.

If the problem cannot be resolved, use the data collection tool to collect data, and then contact a system administrator.

KAVB9302-E
The product information could not be acquired because the environment is invalid. (Detailed information: function-name, return-value)

An attempt to acquire product information failed because the environment is invalid.

S:

Suspends processing.

O:

Determine whether a system error has occurred.

Uninstall the product, re-install it, and then retry the operation.

If the error cannot be resolved, use the data collection tool to collect data, and then contact a system administrator.

KAVB9901-W
This platform is unsupported. Do you want to cancel installation?

Confirms that you want to suspend processing.

S:

When Yes is clicked, the system suspends processing. When No is clicked, the system continues processing.

O:

Install the item in a supported OS.

KAVB9902-E
This platform is unsupported. Installation will now be cancelled.

This platform is not supported.

S:

Suspends processing.

O:

Install the item in a supported OS.

KAVB9903-E
The login account does not have the permissions necessary for installation. Please log in as a user with administrator permissions.

The account that is logged in does not have necessary permission for installation.

S:

Suspends processing.

O:

Log in as a user with Administrator permissions, and then re-install the item.

KAVB9906-W
The specified installation path is invalid. Please specify a fixed disk.

The specified installation destination is invalid.

S:

Continues processing.

O:

A fixed disk must be specified as the installation destination drive. Check the specified path, and specify a valid installation path.

KAVB9907-E
An attempt to uninstall product-name version has failed.

An attempt to uninstall product-name version failed.

S:

Suspends processing.

O:

Take the corrective action given in the recovery procedures for move operations.

KAVB9908-E
An attempt to stop the service has failed.

An attempt to stop the service failed.

S:

Suspends processing.

O:

Stop unnecessary services, and then install again.

KAVB9910-E
An attempt to copy a file has failed.

An attempt to copy a file failed.

S:

Suspends processing.

O:

Stop unnecessary services, and then install again.

KAVB9912-E
An attempt to open a file has failed.
Unopened file: file-name

An attempt to open a file failed.

S:

Suspends processing.

O:

Stop unnecessary services, and then install again.

KAVB9913-E
An attempt to access a file has failed.
Inaccessible file: file-name

A file could not be accessed.

S:

Suspends processing.

O:

Stop unnecessary services, and then install again.

KAVB9914-E
Installation will now be cancelled because information necessary for the installation is insufficient.

There is not enough information for installation.

S:

Suspends processing.

O:

Stop unnecessary services, and then install again.

KAVB9915-E
Information could not be written to the registry.

Information could not be specified in the registry.

S:

Suspends processing.

O:

Stop unnecessary services, and then install again.

KAVB9916-W
An attempt to register a service into the Services file has failed.
Unregistered service: service-name port-number/protocol

An attempt to register a service in the services file failed.

S:

Continues processing.

O:

After installation is complete, register the service indicated in the message in the services file.

KAVB9917-W
An attempt to register the PATH environment variable has failed.
Unregistered path: path-name

An attempt to configure the Path environment variable failed.

S:

Continues processing.

O:

After installation is complete, specify the value indicated in the message in the Path environment variable.

KAVB9918-W
An attempt to acquire a logical host name has failed.
Please make sure the (JP1Console_'logical host name')
service of the logical host has stopped,
and then continue the installation.
Do you want to continue?

An attempt to acquire the configured logical host name failed.

S:

When Yes is clicked, the system continues processing.

When No is clicked, the system suspends processing.

O:

If the logical host service (JP1Console_logical-host-name) is running, stop the service, and then continue processing.

KAVB9919-E
The installation will stop because the (service-name) service is running.

Processing was suspended because the (service-name) service is running.

S:

Suspends processing.

O:

Stop the service indicated by service-name, and the perform the installation again.

KAVB9920-E
An attempt to move to product-name version failed because the common definition could not be registered.

An attempt to move product-name version failed because an attempt to register common definition information failed.

S:

Suspends processing.

O:

Take the corrective action given in the recovery procedures for move operations.

KAVB9925-E
A file necessary for installation was not found.

A file required for installation was not found.

S:

Suspends processing.

O:

Collect data, and then contact a system administrator.

KAVB9927-E
An attempt to register a service has failed.

An attempt to register a service failed.

S:

Suspends processing.

O:

Restart the computer, and then install again.

KAVB9928-E
An attempt to create a file has failed.

An attempt to create a file failed.

S:

Suspends processing.

O:

Stop unnecessary services, and then install again.

KAVB9929-E
An attempt to acquire common definition information has failed.

An attempt to acquire common definition information failed.

S:

Suspends processing.

O:

Stop unnecessary services, and then install again.

KAVB9933-W
An attempt to delete a port has failed.
Service for the undeleted port: service-name

An attempt to delete a port failed.

S:

Continues processing.

O:

After installation is complete, delete the service indicated in the message from the SERVICES file.

KAVB9934-W
An attempt to delete a path in the PATH environment variable has failed.
Undeleted path: path-name

An attempt to delete the Path environment variable failed.

S:

Continues processing.

O:

After installation is complete, delete the value indicated in the message from the Path environment variable.

KAVB9935-E
The installation path specified for product-name version cannot be used because it is not on a fixed disk.

The installation destination for product-name version is not a fixed disk.

S:

Suspends processing.

O:

Make sure that the product indicated by product-name is installed correctly.

KAVB9936-E
An attempt to register the common definition information has failed.

An attempt to register common definition information failed.

S:

Suspends processing.

O:

Make sure that JP1/Base is installed correctly.

KAVB9937-W
There is not enough free space on the disk specified as the installation destination.
Specify another disk.

There is not enough free space on the disk specified as the installation destination.

S:

Continues processing.

O:

Specify a drive that has sufficient free space.

KAVB9938-E
A prerequisite version of JP1/Base is not installed. The installation will now stop.

A prerequisite version of JP1/Base is not installed.

S:

Suspends processing.

O:

Install the prerequisite version of JP1/Base.

KAVB9939-E
An attempt to change the display name of a service has failed. (Service that failed to be changed: service-name)

An attempt to change the service display name failed.

S:

Suspends processing.

O:

Stop the service indicated by service-name, and then install again.

KAVB9940-E
Unsetup has not been performed for the IM database service on the physical host.

The IM database service has not been unset up.

S:

Suspends processing.

O:

Execute the jcodbunsetup and jcfdbunsetup commands to unset up the IM database service, and then uninstall it again.

KAVB9941-E
Unsetup has not been performed for the IM database service on the logical host. (Logical host name: logical-host-name)

The IM database service of the logical host has not been unset up.

S:

Suspends processing.

O:

Execute the jcodbunsetup and jcfdbunsetup commands to unset up the IM database service of the logical host, and then uninstall it again.

KAVB9950-E
An attempt to install the Hitachi trace library has failed.
After the JP1/IM-View installer finishes, please re-install JP1/IM-View.

An attempt to install the Hitachi trace library failed.

S:

Suspends processing.

O:

Wait until installation processing finishes, and then re-install JP1/IM - View.

KAVB9951-E
An attempt to save the definition file storage folder has failed.

An attempt to save the definition file storage folder failed.

S:

Suspends processing.

O:

Stop any unnecessary services, and then perform the installation again.

KAVB9952-E
An attempt to save the image file of the integrated function menu has failed.

An attempt to save the image file of the integrated function menu failed.

S:

Suspends processing.

O:

Stop any unnecessary services, and then perform the installation again.

KAVB9953-E
An attempt to restore the definition file storage folder has failed.

An attempt to restore the definition file storage folder failed.

S:

Suspends processing.

O:

Take the corrective action given in the recovery procedures for move operations.

KAVB9954-E
An attempt to restore the image file of the integrated function menu has failed.

An attempt to restore the image file of the integrated function menu failed.

S:

Suspends processing.

O:

Take the corrective action given in the recovery procedures for move operations.

KAVB9955-E
Information could not be acquired from the registry.

Information could not be acquired from the registry.

S:

Suspends processing.

O:

Stop any unnecessary applications, and then perform the installation again.

KAVB9956-E
An attempt to add an access permission has failed.

An attempt to add an access permission failed.

S:

Suspends processing.

O:

Stop any unnecessary applications, and then perform the installation again.

KAVB9957-E
An attempt to delete JRE has failed. (directory = Console-path or View-path\bin\jre)

An attempt to delete a file or directory of JRE failed because a program of JP1/IM - Central Console or JP1/IM - View is running and the JRE files and directories could not be accessed.

S:

Cancels processing.

O:

Perform the following procedures:

(1) Stop any program products that are running.

(a) If the message is output to the directory View-path\bin\jre:

Stop JP1/IM - View.

(b) If the message is output to the directory Console-path\bin\jre:

Stop all instances of JP1/IM - View that are connected to JP1/IM - Central Console, and then stop any instances of JP1/IM - Central Console running on the physical host or a logical host.

(2) Reinstall the product you have been attempting to install.

KAVB9958-W
An attempt to register common definition information has failed. (file name = file-name)

An attempt to register common definition information failed.

S:

Continues processing.

O:

After installation is complete, execute the following command:

jbssetcnf.exe file-name

KAVB9959-E
The login account does not have the permissions necessary for installation or uninstallation. Please log in as a user with administrator permissions.

The account that is logged in does not have permissions required to install or uninstall.

S:

Suspends processing.

O:

Log in as an administrator to install or uninstall.

KAVB9990-E
Memory is insufficient.
Please stop any unnecessary applications, and then execute installation again.

There is insufficient memory.

S:

Suspends processing.

O:

Stop any unnecessary applications, and then perform the installation again.

KAVB9991-E
An internal error has occurred.
Acquire the relevant data, and then contact the system administrator.

An internal error occurred.

S:

Suspends processing.

O:

Collect data, and then contact a system administrator.

KAVB9998-E
An error might exist in the operation. Please install by using HCD_INST.EXE.

An error might have occurred during the operation.

S:

Suspends processing.

O:

Execute HCD_INST.EXE to install.

KAVB9999-E
Code 9999
The media might be defective. Please contact the seller.

The media might be defective.

S:

Suspends processing.

O:

Contact the vendor.

[Contents][Back][Next]

[Trademarks]