Job Management Partner 1/Integrated Management - Manager Command and Definition File Reference

Lists of commands

This section provides tables that list the commands that can be used in JP1/IM. Whether a command is supported in the Windows and UNIX environments is indicated in the tables by the following notations and notes:

Y: Supported

--: Not supported

#1: In Windows, a superuser means a user with Administrator permissions.

#2: This is a JP1/Base command (related to configuration definition and command execution) for the manager. For details about the command, see the chapter that describes commands in the Job Management Partner 1/Base User's Guide.

#3: In Windows Server 2008, you need Administrator permissions (if the Windows UAC feature is enabled, the command is executed from the administrator console).

Following the tables below, the commands are presented and explained in alphabetical order.

Commands related to startup, termination, and setup

Overview of function Command name Windows UNIX Required execution permission

Sets up JP1/IM - Manager (JP1/IM - Central Console) jp1cc_setup (UNIX only) -- Y Superuser

Sets up JP1/IM - Manager (JP1/IM - Central Scope) jp1cs_setup (UNIX only) -- Y Superuser

Starts JP1/IM - Manager automatically jco_start (UNIX only) -- Y Superuser

Terminates JP1/IM - Manager automatically jco_stop (UNIX only) -- Y Superuser

Displays the status of JP1/IM - Manager processes jco_spmd_status Y Y Superuser^#¹

Updates the status of JP1/IM - Manager processes jco_spmd_reload Y Y Superuser^#¹

Specifies settings required for operation in a cluster system jp1cohasetup (Windows only) Y -- Superuser^#¹

jp1cshasetup (Windows only) Y -- Superuser^#¹

jp1cc_setup_cluster (UNIX only) -- Y Superuser

jp1cs_setup_cluster (UNIX only) -- Y Superuser

Starts JP1/IM - Manager in a cluster system jco_start.cluster (UNIX only) -- Y Superuser

Terminates JP1/IM - Manager in a cluster system jco_stop.cluster (UNIX only) -- Y Superuser

Forcibly terminates JP1/IM - Manager in a cluster system jco_killall.cluster (UNIX only) -- Y Superuser

Overview of function	Command name	Windows	UNIX	Required execution permission
Sets up JP1/IM - Manager (JP1/IM - Central Console)	jp1cc_setup (UNIX only)	--	Y	Superuser
Sets up JP1/IM - Manager (JP1/IM - Central Scope)	jp1cs_setup (UNIX only)	--	Y	Superuser
Starts JP1/IM - Manager automatically	jco_start (UNIX only)	--	Y	Superuser
Terminates JP1/IM - Manager automatically	jco_stop (UNIX only)	--	Y	Superuser
Displays the status of JP1/IM - Manager processes	jco_spmd_status	Y	Y	Superuser^#¹
Updates the status of JP1/IM - Manager processes	jco_spmd_reload	Y	Y	Superuser^#¹
Specifies settings required for operation in a cluster system	jp1cohasetup (Windows only)	Y	--	Superuser^#¹
jp1cshasetup (Windows only)	Y	--	Superuser^#¹
jp1cc_setup_cluster (UNIX only)	--	Y	Superuser
jp1cs_setup_cluster (UNIX only)	--	Y	Superuser
Starts JP1/IM - Manager in a cluster system	jco_start.cluster (UNIX only)	--	Y	Superuser
Terminates JP1/IM - Manager in a cluster system	jco_stop.cluster (UNIX only)	--	Y	Superuser
Forcibly terminates JP1/IM - Manager in a cluster system	jco_killall.cluster (UNIX only)	--	Y	Superuser

Commands related to IM databases

Overview of function Command name Windows UNIX Required execution permission

Sets up the IM Configuration Management database for storing configuration information jcfdbsetup Y Y Superuser^#¹

Cancels setup of the IM Configuration Management database that stores configuration information jcfdbunsetup Y Y Superuser^#¹

Sets up an integrated monitoring database for storing JP1 events jcodbsetup Y Y Superuser^#¹

Cancels setup of the integrated monitoring database that stores JP1 events jcodbunsetup Y Y Superuser^#¹

Outputs to a CSV file JP1 event information registered in the integrated monitoring database jcoevtreport Y Y Superuser^#¹

Backs up the IM database jimdbbackup Y Y Superuser^#¹

Releases free area (free page area) in the IM Configuration Management database jimdbreclaim Y Y Superuser^#¹

Restores (recovers) a database from a backup that has been stored jimdbrecovery Y Y Superuser^#¹

Reorganizes fragmented free space in a database jimdbrorg Y Y Superuser^#¹

Checks the operating status of the IM database (such as running or stopped) jimdbstatus Y Y Superuser^#¹

Terminates the IM database jimdbstop Y Y Superuser^#¹

Overview of function	Command name	Windows	UNIX	Required execution permission
Sets up the IM Configuration Management database for storing configuration information	jcfdbsetup	Y	Y	Superuser^#¹
Cancels setup of the IM Configuration Management database that stores configuration information	jcfdbunsetup	Y	Y	Superuser^#¹
Sets up an integrated monitoring database for storing JP1 events	jcodbsetup	Y	Y	Superuser^#¹
Cancels setup of the integrated monitoring database that stores JP1 events	jcodbunsetup	Y	Y	Superuser^#¹
Outputs to a CSV file JP1 event information registered in the integrated monitoring database	jcoevtreport	Y	Y	Superuser^#¹
Backs up the IM database	jimdbbackup	Y	Y	Superuser^#¹
Releases free area (free page area) in the IM Configuration Management database	jimdbreclaim	Y	Y	Superuser^#¹
Restores (recovers) a database from a backup that has been stored	jimdbrecovery	Y	Y	Superuser^#¹
Reorganizes fragmented free space in a database	jimdbrorg	Y	Y	Superuser^#¹
Checks the operating status of the IM database (such as running or stopped)	jimdbstatus	Y	Y	Superuser^#¹
Terminates the IM database	jimdbstop	Y	Y	Superuser^#¹

Overview of function Command name Windows UNIX Required execution permission

Outputs the system hierarchy, host information, and definition information managed by IM Configuration Management jcfexport Y Y Superuser^#¹

Imports IM Configuration Management information jcfimport Y Y Superuser^#¹

Creates from the host input information file and Central Scope export file a Central Scope import file that contains monitoring tree information for a virtualization configuration jcfmkcsdata Y Y Superuser^#¹

Sets up an operating environment for the IM Configuration Management processes of JP1/IM - Manager jp1cf_setup (UNIX only) -- Y Superuser

Acquires virtualization configuration information from VMware ESX and outputs it to a virtualization configuration information file jcfcolvmesx Y Y Superuser^#¹

Uses a virtualization configuration information file to update a host input information file jcfmkhostsdata Y Y Superuser^#¹

Sets up an environment for IM Configuration Management for cluster system operation jp1cf_setup_cluster (UNIX only) -- Y Superuser

Sets up an environment for IM Configuration Management for cluster system operation jp1cfhasetup (Windows only) Y -- Superuser^#¹

Overview of function	Command name	Windows	UNIX	Required execution permission
Outputs the system hierarchy, host information, and definition information managed by IM Configuration Management	jcfexport	Y	Y	Superuser^#¹
Imports IM Configuration Management information	jcfimport	Y	Y	Superuser^#¹
Creates from the host input information file and Central Scope export file a Central Scope import file that contains monitoring tree information for a virtualization configuration	jcfmkcsdata	Y	Y	Superuser^#¹
Sets up an operating environment for the IM Configuration Management processes of JP1/IM - Manager	jp1cf_setup (UNIX only)	--	Y	Superuser
Acquires virtualization configuration information from VMware ESX and outputs it to a virtualization configuration information file	jcfcolvmesx	Y	Y	Superuser^#¹
Uses a virtualization configuration information file to update a host input information file	jcfmkhostsdata	Y	Y	Superuser^#¹
Sets up an environment for IM Configuration Management for cluster system operation	jp1cf_setup_cluster (UNIX only)	--	Y	Superuser
Sets up an environment for IM Configuration Management for cluster system operation	jp1cfhasetup (Windows only)	Y	--	Superuser^#¹

Commands related to upgrading

Overview of function Command name Windows UNIX Required execution permission

Converts an action definition file from version 08-50 or earlier to version 09-00 jcadefconv Y Y Superuser^#¹

Changes the location of the event acquisition filter from Event Console Service to Event Base Service (when the event acquisition filter is being used for compatibility) jcochafmode Y Y Superuser^#¹

Migrates JP1/Base command execution logs for version 7 or earlier to a command execution log file for version 8 jcocmdconv^#2 Y Y Superuser^#1

Upgrades a logical host environment that was set up with a previous version of JP1/IM - Manager or JP1/IM - Central Console jp1cohaverup Y Y Superuser^#¹

Upgrades a physical host environment of a previous version of JP1/IM - Central Scope jp1csverup.bat (Windows only) Y -- Superuser^#¹

Upgrades a logical host environment that was set up by a previous version of JP1/IM - Central Scope jp1cshaverup.bat (Windows only) Y -- Superuser^#¹

Upgrades a physical host environment from a previous version of JP1/IM - Central Scope jp1csverup (UNIX only) -- Y Superuser

Upgrades a logical host environment that was set up by a previous version of JP1/IM - Central Scope jp1cshaverup (UNIX only) -- Y Superuser

Overview of function	Command name	Windows	UNIX	Required execution permission
Converts an action definition file from version 08-50 or earlier to version 09-00	jcadefconv	Y	Y	Superuser^#¹
Changes the location of the event acquisition filter from Event Console Service to Event Base Service (when the event acquisition filter is being used for compatibility)	jcochafmode	Y	Y	Superuser^#¹
Migrates JP1/Base command execution logs for version 7 or earlier to a command execution log file for version 8	jcocmdconv^#2	Y	Y	Superuser^#1
Upgrades a logical host environment that was set up with a previous version of JP1/IM - Manager or JP1/IM - Central Console	jp1cohaverup	Y	Y	Superuser^#¹
Upgrades a physical host environment of a previous version of JP1/IM - Central Scope	jp1csverup.bat (Windows only)	Y	--	Superuser^#¹
Upgrades a logical host environment that was set up by a previous version of JP1/IM - Central Scope	jp1cshaverup.bat (Windows only)	Y	--	Superuser^#¹
Upgrades a physical host environment from a previous version of JP1/IM - Central Scope	jp1csverup (UNIX only)	--	Y	Superuser
Upgrades a logical host environment that was set up by a previous version of JP1/IM - Central Scope	jp1cshaverup (UNIX only)	--	Y	Superuser

Commands related to login and logout

Overview of function Command name Windows UNIX Required execution permission

Starts IM Configuration Management - View jcfview (Windows only) Y -- None

Registers into or deletes from the Windows Start menu the menu item for starting IM Configuration Management - View jcovcfsetup (Windows only) Y -- Superuser^#¹

Opens JP1/IM - View's Login window or Monitoring Tree (Editing) window, or logs in to JP1/IM - Manager from the command line jcoview (Windows only) Y -- None

Overview of function	Command name	Windows	UNIX	Required execution permission
Starts IM Configuration Management - View	jcfview (Windows only)	Y	--	None
Registers into or deletes from the Windows Start menu the menu item for starting IM Configuration Management - View	jcovcfsetup (Windows only)	Y	--	Superuser^#¹
Opens JP1/IM - View's Login window or Monitoring Tree (Editing) window, or logs in to JP1/IM - Manager from the command line	jcoview (Windows only)	Y	--	None

Commands related to configuration definition

Overview of function Command name Windows UNIX Required execution permission

Distributes configuration definition information to the lower hosts and enables the definition information jbsrt_distrib^#2 Y Y Superuser^#¹

Collects configuration definition information from the lower hosts and updates the configuration definition jbsrt_sync^#2 Y Y Superuser^#¹

Deletes the configuration definition information for the host that executed the command jbsrt_del^#2 Y Y Superuser^#¹

Displays the existing configuration definition information jbsrt_get^#2 Y Y Superuser^#¹

Overview of function	Command name	Windows	UNIX	Required execution permission
Distributes configuration definition information to the lower hosts and enables the definition information	jbsrt_distrib^#2	Y	Y	Superuser^#¹
Collects configuration definition information from the lower hosts and updates the configuration definition	jbsrt_sync^#2	Y	Y	Superuser^#¹
Deletes the configuration definition information for the host that executed the command	jbsrt_del^#2	Y	Y	Superuser^#¹
Displays the existing configuration definition information	jbsrt_get^#2	Y	Y	Superuser^#¹

Commands related to events

Overview of function Command name Windows UNIX Required execution permission

Changes the response status for severe events jcochstat Y Y None^#3

Sets up a JP1/IM - Manager system environment jcoimdef Y Y Superuser^#¹

Overview of function	Command name	Windows	UNIX	Required execution permission
Changes the response status for severe events	jcochstat	Y	Y	None^#3
Sets up a JP1/IM - Manager system environment	jcoimdef	Y	Y	Superuser^#¹

Commands related to automated actions and command execution

Overview of function Command name Windows UNIX Required execution permission

Checks the definitions of automated actions and merges multiple automated action definition files jcamakea Y Y Superuser^#¹

Displays the result of automated action execution jcashowa Y Y None^#3

Displays to standard output the status of the Automatic Action Service that is running and the contents of the automated action definition file that is loaded.. jcastatus Y Y None^#3

Reloads the automated action definitions or places the automated action function on standby jcachange Y Y Superuser^#¹

Cancels automated actions jcacancel Y Y Superuser^#¹

Sets up a command execution environment jcocmddef^#2 Y Y Superuser^#¹

Outputs logs of executed commands jcocmdlog^#2 Y Y None

Deletes commands that were executed from JP1/IM - View or executed by automated actions jcocmddel^#2 Y Y Superuser^#¹

Checks the status of commands that were executed from JP1/IM - View or executed by automated actions jcocmdshow^#2 Y Y Superuser^#¹

Overview of function	Command name	Windows	UNIX	Required execution permission
Checks the definitions of automated actions and merges multiple automated action definition files	jcamakea	Y	Y	Superuser^#¹
Displays the result of automated action execution	jcashowa	Y	Y	None^#3
Displays to standard output the status of the Automatic Action Service that is running and the contents of the automated action definition file that is loaded..	jcastatus	Y	Y	None^#3
Reloads the automated action definitions or places the automated action function on standby	jcachange	Y	Y	Superuser^#¹
Cancels automated actions	jcacancel	Y	Y	Superuser^#¹
Sets up a command execution environment	jcocmddef^#2	Y	Y	Superuser^#¹
Outputs logs of executed commands	jcocmdlog^#2	Y	Y	None
Deletes commands that were executed from JP1/IM - View or executed by automated actions	jcocmddel^#2	Y	Y	Superuser^#¹
Checks the status of commands that were executed from JP1/IM - View or executed by automated actions	jcocmdshow^#2	Y	Y	Superuser^#¹

Commands related to correlation event generation

Overview of function Command name Windows UNIX Required execution permission

Changes correlation event generation definitions jcoegschange Y Y Superuser^#¹

Checks the contents of a correlation event generation definition file jcoegscheck Y Y Superuser^#¹

Places the correlation event generation function in correlation running status jcoegsstart Y Y Superuser^#¹

Displays the status of the correlation event generation function and the correlation event generation definitions that are being used currently jcoegsstatus Y Y None^#3

Places the correlation event generation function in standby status jcoegsstop Y Y Superuser^#¹

Overview of function	Command name	Windows	UNIX	Required execution permission
Changes correlation event generation definitions	jcoegschange	Y	Y	Superuser^#¹
Checks the contents of a correlation event generation definition file	jcoegscheck	Y	Y	Superuser^#¹
Places the correlation event generation function in correlation running status	jcoegsstart	Y	Y	Superuser^#¹
Displays the status of the correlation event generation function and the correlation event generation definitions that are being used currently	jcoegsstatus	Y	Y	None^#3
Places the correlation event generation function in standby status	jcoegsstop	Y	Y	Superuser^#¹

Commands used in the Central Scope environment setup

Overview of function Command name Windows UNIX Required execution permission

Registers host information into the host information database jcshostsimport Y Y Superuser^#¹

Acquires host information from the host information database jcshostsexport Y Y Superuser^#¹

Re-creates the monitoring object database jcsdbsetup Y Y Superuser^#¹

Overview of function	Command name	Windows	UNIX	Required execution permission
Registers host information into the host information database	jcshostsimport	Y	Y	Superuser^#¹
Acquires host information from the host information database	jcshostsexport	Y	Y	Superuser^#¹
Re-creates the monitoring object database	jcsdbsetup	Y	Y	Superuser^#¹

Commands related to filters

Overview of function Command name Windows UNIX Required execution permission

Switches the event acquisition filter jcochfilter Y Y Superuser^#¹

Overview of function	Command name	Windows	UNIX	Required execution permission
Switches the event acquisition filter	jcochfilter	Y	Y	Superuser^#¹

Commands related to changing the monitoring node status in Central Scope

Overview of function Command name Windows UNIX Required execution permission

Changes the status of monitoring nodes (monitoring objects or monitoring groups) jcschstat Y Y Superuser^#¹

Overview of function	Command name	Windows	UNIX	Required execution permission
Changes the status of monitoring nodes (monitoring objects or monitoring groups)	jcschstat	Y	Y	Superuser^#¹

Commands for migrating monitoring object database information in Central Scope

Overview of function Command name Windows UNIX Required execution permission

Acquires monitoring object database storage information from JP1/IM - Manager and outputs it locally to a file jcsdbexport Y Y Superuser^#¹

Applies the information output to a file by the jcsdbexport command to the monitoring object database of JP1/IM - Manager jcsdbimport Y Y Superuser^#¹

Overview of function	Command name	Windows	UNIX	Required execution permission
Acquires monitoring object database storage information from JP1/IM - Manager and outputs it locally to a file	jcsdbexport	Y	Y	Superuser^#¹
Applies the information output to a file by the jcsdbexport command to the monitoring object database of JP1/IM - Manager	jcsdbimport	Y	Y	Superuser^#¹

Commands used for troubleshooting

Overview of function Command name Windows UNIX Required execution permission

Creates a Java thread dump of IM Configuration Management - View jcfthreaddmp (Windows only) Y -- None

Collects data in the event of a failure in JP1/IM - Manager or JP1/IM - View jim_log.bat (Windows only) Y -- None^#3

Collects data in the event of a failure in JP1/IM - Manager jim_log.sh (UNIX only) -- Y Superuser

Collects data in the event of a failure in JP1/IM - View jcoview_log.bat (Windows only) Y -- None

Outputs a thread dump in the event of a failure in JP1/IM - View jcothreaddmp (Windows only) Y -- None

Outputs a thread dump and a core dump (UNIX only) in the event of a failure in JP1/IM - Manager jcogencore Y Y Superuser^#¹

Tests the notification command that is defined in the health check definition file in JP1/IM - Manager jcohctest Y Y Superuser^#¹

Overview of function	Command name	Windows	UNIX	Required execution permission
Creates a Java thread dump of IM Configuration Management - View	jcfthreaddmp (Windows only)	Y	--	None
Collects data in the event of a failure in JP1/IM - Manager or JP1/IM - View	jim_log.bat (Windows only)	Y	--	None^#3
Collects data in the event of a failure in JP1/IM - Manager	jim_log.sh (UNIX only)	--	Y	Superuser
Collects data in the event of a failure in JP1/IM - View	jcoview_log.bat (Windows only)	Y	--	None
Outputs a thread dump in the event of a failure in JP1/IM - View	jcothreaddmp (Windows only)	Y	--	None
Outputs a thread dump and a core dump (UNIX only) in the event of a failure in JP1/IM - Manager	jcogencore	Y	Y	Superuser^#¹
Tests the notification command that is defined in the health check definition file in JP1/IM - Manager	jcohctest	Y	Y	Superuser^#¹

Commands for extending the JP1/IM - Manager functions

Overview of function Command name Windows UNIX Required execution permission

Checks the definition file for extended event attributes jcoattrfcheck Y Y None^#3

Checks the definition file for opening monitor windows jcomonitorfcheck Y Y None^#3

Checks the definition file for executing applications jcoappexecfcheck Y Y None

Checks the definition file for the Tool Launcher window jcofuncfcheck Y Y None

Overview of function	Command name	Windows	UNIX	Required execution permission
Checks the definition file for extended event attributes	jcoattrfcheck	Y	Y	None^#3
Checks the definition file for opening monitor windows	jcomonitorfcheck	Y	Y	None^#3
Checks the definition file for executing applications	jcoappexecfcheck	Y	Y	None
Checks the definition file for the Tool Launcher window	jcofuncfcheck	Y	Y	None

[Contents][Back][Next]

[Trademarks]