Job Management Partner 1/Integrated Management - Manager Overview and System Design Guide

Appendix C.2 Direction of communication through a firewall

The table below describes the direction in which hosts communicate through a firewall. JP1/IM supports both packet filtering and NAT (static mode).

Table C-2 Direction of communication through a firewall

Service name	Port number	Direction of communication
jp1imevtcon	20115/tcp	JP1/IM - View -> JP1/IM - Manager (JP1/IM - Central Console)
jp1imcmda	20238/tcp	JP1/IM - View -> JP1/IM - Manager (JP1/IM - Central Console) JP1/IM - Manager (JP1/IM - Central Console) -> JP1/Base#1
jp1imcss	20305/tcp	JP1/IM - View -> JP1/IM - Manager (JP1/IM - Central Scope)
jp1rmregistry	20380/tcp	JP1/IM - View -> JP1/IM - Rule Operation
jp1rmobject	20381/tcp
jp1imegs	20383/tcp	Firewall setup is unnecessary because all communication takes place on the machine on which JP1/IM - Manager is installed.
JP1/IM-Manager DB Server	20700/tcp	JP1/IM - Manager -> JP1/IM-Manager DB Server
jp1imcf	20702/tcp	JP1/IM - View -> JP1/IM - Manager (IM Configuration Management)
jp1imfcs	20701/tcp	Firewall setup is unnecessary because all communication takes place on the machine on which JP1/IM - Manager is installed.
jp1imeds	23045/tcp	Firewall setup is unnecessary because all communication takes place on the machine on which JP1/IM - Manager is installed.
http	80/tcp#2	Web-based JP1/IM - View (Web browser) -> Web server

Legend:

->: Direction of the connection when established

#1: Refers to JP1/Base on the manager.

#2: The port number may differ depending on the Web server settings.

When a connection is established, the port number in the table is used by the side being connected (the side the arrow points at). The connecting side uses an available port number assigned by the OS. The range of port numbers that can be used is OS-dependent.

When JP1/IM is installed on a firewall server host, communications within that machine may also be subject to the firewall restrictions. In this case, set up the firewall so that services can use the port numbers in the table even for communications within the firewall server host.

For details on operation with a firewall, see 7.3 Operating in a firewall environment in the Job Management Partner 1/Integrated Management - Manager Configuration Guide.

[Contents][Back][Next]

All Rights Reserved. Copyright (C) 2009, Hitachi, Ltd.