Job Management Partner 1/Integrated Management - Manager Overview and System Design Guide

12.4.4 Operation behind a firewall

JP1/IM supports operation in a network configuration through a firewall. JP1/IM supports the firewall packet filtering method and the NAT static conversion method.

See the following references when considering setup and operation.

About operation behind a firewall:

Use in a firewall environment
See 7. Operation and Environment Configuration Depending on the Network Configuration in the Job Management Partner 1/Integrated Management - Manager Configuration Guide.
Also see the description of JP1/Base communication settings according to network configuration in the Job Management Partner 1/Base User's Guide.

Organization of this subsection

(1) Notes

(1) Notes

There are two types of communication between a manager and agent: Communication according to the JP1/IM system hierarchy, and direct communication with the target host (see 7.3 Communication performed in the JP1/IM system environment). The firewall settings must support the type of communication being used.

JP1/IM and JP1/Base use ports even for communication within the local host. If you are using JP1/IM and JP1/Base on the host set up as a firewall, the firewall settings must permit local traffic through all the ports used by JP1/IM and JP1/Base.

[Contents][Back][Next]

[Trademarks]