KAMN516-E (E)

The operand specified in the definition file is invalid.

         aa....aa: Definition file name

         bb....bb: Operand name

         cc....cc: Operand specification value

         dd....dd: Detail code

                        Detail code

                        Meaning

                        NOT HBONDING

                        Because the specified LAN interface is not hbonding, the status of hbonding cannot be monitored using the LAN monitoring function.

                        NOT 802.3AD LACP

                        Because the operating mode of the specified LAN interface is not 802.3AD, errors might not be detected if the LAN monitoring function is used to monitor the status of hbonding.

                        NOT FOUND LANMONDEF

                        Because there is no LAN monitor definition file for the specified LAN interface, the LAN monitoring function cannot be used.

                        NOT FOUND DISKMONDEF

                        Although the settings for using disk monitoring are defined, disk monitoring cannot be used because there is no disk monitoring definition file.

                        FAILED FENCE_NETWORK_ENV

                        Although hot-standby switchover based on network disconnection is set, the system might not be able to perform hot-standby switchover if a host failure occurs for either of the following reasons:

                              The network-disconnection settings file does not exist or has definition errors.

                              The AWS CLI does not work correctly on AWS.

               S:

                  Continues processing.

               O:

                  Take one of the following actions, as indicated by the detail code:

                                 Detail code

                                 Corrective action

                                 NOT HBONDING

                                 Make sure that the specified LAN interface is hbonding, and then specify hbonding.

                                 NOT 802.3AD LACP

                                 Make sure that the operating mode of the specified LAN interface is 802.3AD, and then specify hbonding with operating mode 802.3AD.

                                 NOT FOUND LANMONDEF

                                 Make sure that there is a LAN monitor definition file that corresponds to the specified LAN interface, and then define the settings for using the LAN monitoring function.

                                 NOT FOUND DISKMONDEF

                                 Create a disk monitoring definition file.

                                 FAILED FENCE_NETWORK_ENV

                                 If the AWS CLI does not work correctly on AWS, check and, if necessary, revise the settings to correct errors by referring to "[AWS] Configuring AWS" in the manual For Public Cloud Systems HA Monitor Cluster Software Guide.

                                 If the AWS CLI works on AWS, correctly create the network-disconnection settings file.

Detail code	Meaning
`NOT` `HBONDING`	Because the specified LAN interface is not `hbonding`, the status of `hbonding` cannot be monitored using the LAN monitoring function.
`NOT` `802.3AD` `LACP`	Because the operating mode of the specified LAN interface is not `802.3AD`, errors might not be detected if the LAN monitoring function is used to monitor the status of `hbonding`.
`NOT` `FOUND` `LANMONDEF`	Because there is no LAN monitor definition file for the specified LAN interface, the LAN monitoring function cannot be used.
`NOT` `FOUND` `DISKMONDEF`	Although the settings for using disk monitoring are defined, disk monitoring cannot be used because there is no disk monitoring definition file.
`FAILED` `FENCE_NETWORK_ENV`	Although hot-standby switchover based on network disconnection is set, the system might not be able to perform hot-standby switchover if a host failure occurs for either of the following reasons: The network-disconnection settings file does not exist or has definition errors. The AWS CLI does not work correctly on AWS.

Detail code	Corrective action
`NOT` `HBONDING`	Make sure that the specified LAN interface is `hbonding`, and then specify `hbonding`.
`NOT` `802.3AD` `LACP`	Make sure that the operating mode of the specified LAN interface is `802.3AD`, and then specify `hbonding` with operating mode `802.3AD`.
`NOT` `FOUND` `LANMONDEF`	Make sure that there is a LAN monitor definition file that corresponds to the specified LAN interface, and then define the settings for using the LAN monitoring function.
`NOT` `FOUND` `DISKMONDEF`	Create a disk monitoring definition file.
`FAILED` `FENCE_NETWORK_ENV`	If the AWS CLI does not work correctly on AWS, check and, if necessary, revise the settings to correct errors by referring to "[AWS] Configuring AWS" in the manual For Public Cloud Systems HA Monitor Cluster Software Guide. If the AWS CLI works on AWS, correctly create the network-disconnection settings file.