mmm error occurred when mapping service was opened. reason code=aa...aa, maintenance code1=bb...bb, maintenance code2=cc...cc, mapping identifier=dd...dd
- mmm: MCF identifier
- aa...aa: Reason code
- 00000001: Insufficient process-specific memory.
- 00000007: An XMAP2/W log file error occurred.
- 00000009: The physical map has been destroyed.
- 00000010: Resource allocation was not possible when the mapping service was opened for XMAP2/W.
- 00000014: The XMAP2/W module could not be activated.
- 00000016: A system call error occurred in XMAP2/W.
- 00000017: The XMAP2/W server went down.
- 00000018: A client cannot be connected because the XMAP2/W server resource is full.
- 00000021: A shared memory allocation error occurred for XMAP2/W.
- 00000022: XMAP2/W and XMAP2/W/560 are of different versions.
- 00000024: A memory allocation error occurred for XMAP2/W.
- 00000025: Insufficient local memory for the mapping service.
- 00000027: The mapping service has not been activated.
- 00000035: The mapping service identifier has not been defined.
- bb...bb: Maintenance code 1
- cc...cc: Maintenance code 2
- dd...dd: Mapping identifier
- S:
- When the reason code is 00000001
- Terminates the MCF communication process abnormally.
- When the reason code is 00000007 to 00000035
- Continues processing.
- For any other reason code
- Continues processing.
- O: Contact the OpenTP1 administrator.
- Countermeasure: Take whichever of the following actions is appropriate for the displayed reason code:
- 00000001: Allocate sufficient process-specific memory, then re-execute.
- 00000007: Check the XMAP2/W log file attributes, then re-execute.
- 00000009: Correct the physical map, then re-execute.
- 00000010: Check MAPCNT of the mapping service attribute definition, then re-execute.
- 00000014: Check that XMAP2/W has been installed, then re-execute.
- 00000016: Reactivate the system.
- 00000017: Check that the XMAP2/W server is active, then re-execute.
- 00000018: Increase the number of XMAP2/W servers or reduce the number of clients, then re-execute.
- 00000021: Reactivate the system.
- 00000022: Check the versions of XMAP2/W and XMAP2/W/560, then re-execute.
- 00000024: Reactivate the system.
- 00000025: Allocate sufficient memory, then re-execute.
- 00000027: Activate the mapping service, then re-execute.
- 00000035: Specify the mapping service identifier in the TP1/NET/HNA-560/20 common definition of the MCF communication configuration definition, then re-execute.
- Other value: A failure has occurred which is not mentioned in the reason code list.
- The last four digits of maintenance code 2 indicate the return code for XMAPC.
All Rights Reserved. Copyright (C) 2006, 2010, Hitachi, Ltd.