OpenTP1 Version 7 Messages
KFCA13662-E
mmm displays XMAP3 information. error code=aa...aa detail error code=bb...bb detailed information=cc...cc
- This message displays the return information from XMAP3. For details about the error codes and detail error codes, see the relevant XMAP3 manuals.
- mmm: MCF identifier
- aa...aa: Error code
- bb...bb: Detail error code
- cc...cc: Detailed information
- S: Shuts down the connection or the logical terminal if this message is immediately followed by the KFCA10189-E message. If the KFCA10189-E message is not output, the system follows the instruction shown in the message that was output immediately before this message.
- O: Follow the instructions of the OpenTP1 administrator if the KFCA10189-E message immediately follows this message. If the KFCA10189-E message is not output, follow the instruction shown in the message that was output immediately before this message.
- Countermeasure: Take one of the following countermeasures depending on the status:
- When the error code is 10 (TX_CECDOWN) and the detail error code is 0X03020202 or 0X03020303:
- The display print service does not send a response. Check the status of the display print service.
- When the error code is 29 (TX_CECSYTM) and the detail error code is 0X03020402 or 0X03020502:
- The probable cause of the error is the termination of the display print service. Check the status of the display print service.
- When the error code is 29 (TX_CECSYTM) and the detail error code is 0X04000105 or 0X0400013a:
- The probable cause of the error is the inactive XMAP3 server. Start the XMAP3 server if it is not started.
- When the KFCA10189-E message is output immediately before this message:
- Contact the maintenance personnel.
- Other reasons:
- Follow the instruction of the message that is output immediately before this message.
All Rights Reserved. Copyright (C) 2006, 2010, Hitachi, Ltd.