communication with aaaaaaaa@bbbb failed. reason code=ccc

aaaaaaaa: Name of resource group being connected. (Identifier of up to eight digits)

bbbb: Identifier of OpenTP1 node being connected. (Identifier of up to four digits)

ccc: Reason code

The reason codes are listed in the table below.

O: Proceed as indicated in the reason code list.

Reason code	Meaning	Operator action
101	A memory shortage occurred.	--
103	A network error occurred. Possible causes are as follows: Hardware error in an Ethernet board or cable, etc. The network definition is invalid. The connection destination node is not being executed or the OpenTP1 system is not being executed in that node.	Examine the cause by applying the following procedure, then take appropriate action: (1)Check the connection status of the node using an operating system command. (2)Check the execution status of the connection destination node by using the OpenTP1 command.
105	A time-out occurred during communication with the archiver.	--
112	Specification error in the network definition The OpenTP1 system at the connection destination node is not being executed.	Examine the cause by applying the following procedure, then take appropriate action: (1)Check the connection status of the node using an operating system command. (2)Check the execution status of the connection destination node using an OpenTP1 command.

Legend: --: Not applicable