OpenTP1 Version 7 Messages

[Contents][Index][Back][Next]

KFCA04121-E

error occurred during connection processing from aaaaaaaa@bbbb. reason code=cccc

Error occurred during archiver connection processing.
aaaaaaaa: Name of the resource group which requested connection. (Identifier of up to eight digits)
bbbb: Identifier of the node which requested the connection (Identifier of up to four digits)
cccc: Reason code indicating the contents of the error
Reason codes are listed in the table below.
O: Proceed as indicated in the reason code list.
Reason code Meaning Operator action OpenTP1 administrator action
101 The system terminates due to a memory shortage. Possible causes are as follows:
  • Processes that use large amounts of memory are running in parallel.
  • The amount of installed real memory is insufficient for the system's requirements.
Using a command provided by the OS, identify which process is using a large amount of memory. Re-estimate the required amount of memory.
103 The system terminates because a network error occurred.
Possible causes are as follows:
  • The process which provides services went down.
  • The name server went down.
Reactivate the system. --
105 The system terminates due to a time-out error.
Possible causes are as follows:
  • The max_socket_descriptors value of the system journal service definition file is too small.
  • The system cannot perform processing because the machine load is too heavy.
Using a command provided by the OS, check the machine load. If the machine load is too heavy, reduce the load, then reactivate the system. Check the system journal service definition file, then confirm that the max_socket_descriptors value is appropriate.
2001 The connection request cannot be accepted because the number of journal services for which connection is requested exceeds the maximum number of journal services that can be connected. -- Check that the number of journal services to be connected to a single archive resource group does not exceed the maximum number of journal services that can be connected.
If the maximum number is exceeded, re-design the system configuration.
2002 There is insufficient shared memory. -- Re-estimate the amount of shared memory.
Legend: --: Not applicable