OpenTP1 Version 7 Messages
cannot start checkpoint dump service aa...aa.
reason code=bb...bb
Reason code | Meaning | Countermeasure |
---|---|---|
6 | The capacity of the shared memory pool is not enough to satisfy the requirement. | Check the shared memory size specified in the definition. |
8 77 88 |
Memory shortage | Check the state in which the process-specific memory or shared memory is used. |
9 | Analysis file opening error | Check the definitions for the checkpoint dump file. |
10 | An error that disables analysis processing occurred. | |
12 | Sequence of issuing functions has error. | Contact the maintenance personnel. |
15 36 |
A network failure occurred. | Examine the cause of the error, take corrective action and then restart the system. |
24 | Failure in reading the definition | Take action according to the already output message. |
28 | Memory shortage | Check the state in which the process-specific memory or shared memory is used. |
33 | There is service information cataloged with the same service group name and user key. | Contact maintenance personnel. |
34 | The service information is not cataloged. | |
35 | Timeout | Examine the cause of the error, take corrective action and then restart the system. |
37 | Service information must be cataloged with the nam daemon (for the server on the client machine), but the nam daemon is starting, terminating, or suspended. | Check the execution state of the server with the command provided by OpenTP1. |
38 50 79 |
Inter-process communication error | Examine the cause of the error, take corrective action and then restart the system. |
41 | Status file I/O error | Examine the cause of the error, take corrective action and then restart the system. |
43 | Work area cannot be allocated. | Check the state in which the process-specific memory or shared memory is used. |
44 | Insufficient number of buffer areas | Check the status service definitions. |
45 | Records equivalent to required size cannot be allocated (insufficient status file capacity). | |
47 | Status server is not operating. | Check the execution state of the status server with the command provided by OpenTP1. |
52 | Swapping error | Examine the cause of the error, take corrective action and then restart the system. |
72 | Status write error | |
73 | Status read error | |
74 | Definition analysis error | Check the contents of the checkpoint dump definition, take corrective action, and then restart OpenTP1. If this error occurs repeatedly, contact maintenance personnel. |
76 | Intra-ADM file write error | Examine the cause of the error, take corrective action and then restart the system. |
89 | Definition file name defined twice | Check the definition file, correct settings and then restart the system. |
92 | File opening error | Examine the cause of the error, take corrective action and then restart the system. Details of the error are displayed in KFCA02122-W. |
94 | Error found by analysis | Check the definition file, correct settings and then restart the system. |
101 | Insufficient process memory for SJL processing | Check the state in which the process-specific memory is used. Details of the error are displayed in the SJL message output immediately before this message. |
102 | SRF file definition analysis error | Check the definition of the SRF file Details of the error are displayed in the SJL message output immediately before this message. |
103 | SRF file opening error | Examine the cause of the error, take corrective action, then restart the system. Details of the error are displayed in the SJL message output immediately before this message. |
104 | Error while opening the definition file | Check the contents of the definition file, set the system correctly, and then restart the system. |
106 | Invalid contents of the definition |
All Rights Reserved. Copyright (C) 2006, 2010, Hitachi, Ltd.